
BoxWiFi
WiFi assistant for IoT BOX
0 ratings
Free
About
BoxWiFi helps you configure Wi-Fi on compatible hardware devices. Send the target network name and password to your device via Bluetooth or its own Wi-Fi hotspot.
BLUETOOTH SETUP
Discover nearby Bluetooth devices that support the provisioning protocol. Connect to a device, let it scan for available Wi-Fi networks, then select a network and enter its password to begin setup.
DEVICE HOTSPOT SETUP
Send Wi-Fi settings through the device's own hotspot. Enter the device number, enter or select the target Wi-Fi network name, and provide its password to start provisioning.
QR CODE ENTRY
Scan a device QR code containing a valid device number to fill in the number required for hotspot setup. Manual entry is also available.
SAVED WI-FI CREDENTIALS
Save the network name and password after successful provisioning. Autofill a saved password when using the same network again. Saved Wi-Fi credentials are stored in the system Keychain on your device.
CLEAR SETUP STATUS
Follow device connection, configuration sending, and provisioning results. If a connection fails or times out, review the status message, check the device and network, and try again.
BEFORE YOU START
• Compatible hardware supporting the relevant Bluetooth or hotspot provisioning protocol is required. BoxWiFi does not configure every router or smart device.
• Put your hardware into the appropriate setup mode and have the target Wi-Fi network name and password ready.
• Bluetooth setup requires Bluetooth to be enabled and access granted. Hotspot setup requires Wi-Fi and local network access.
• Camera access is needed to scan device QR codes. Location access is needed to read the Wi-Fi name currently connected to your phone. You can also enter the relevant information manually.
• In hotspot mode, the iPhone cannot directly scan all nearby Wi-Fi networks. In Bluetooth mode, the Wi-Fi list is scanned and returned by compatible hardware.
• Supported Wi-Fi bands and security types depend on your hardware. Refer to its documentation.
Show more
What's New in BoxWiFi
1.0.0
November 14, 2026


