Chronolyze turns your iPhone into a precision timegrapher for mechanical watches. Rest your watch against the microphone and watch the classic paper-tape trace draw itself — no bench equipment, no clip-on sensors.
Every mechanical watch tells you how healthy it is through its ticking. Chronolyze listens to the escapement's impulses and measures the timing between them with sub-millisecond precision.
LIVE MEASUREMENT
• Rate in seconds per day — is your watch running fast or slow?
• Beat error in milliseconds — is the balance swinging symmetrically?
• Amplitude in degrees — how much power reaches the balance wheel?
• Stability — how steady the rate is holding, so you can tell a settled movement from a restless one
• Automatic beat-rate detection from 12,000 to 36,000 bph
• Classic two-line timegrapher trace: slope shows rate, gap shows beat error
• Signal-quality meter so you know when to trust the numbers
• A plain-language verdict on every finished measurement, and a report card you can share
ACCURACY TRACKING
The bench tells you how a watch behaves in thirty seconds. This tells you how it behaves on your wrist. Tap along with the seconds hand every few days and Chronolyze works out how many seconds a day your watch really gains or loses in daily wear — then compare that with the timegrapher reading. A watch that's +2 s/day on the desk but −12 on the wrist has a positional problem, not a rate problem.
No microphone needed, so it works even for watches too quiet to measure.
POSITIONAL TEST
Measure in the six regulation positions — dial up, dial down, crown up, down, left, right — with a guided workflow. The positional variation (Δ) is the number a watchmaker regulates against: Chronolyze computes it and tells you what it means.
MAGNETIZATION CHECK
A suddenly fast watch is usually a magnetized hairspring. Chronolyze uses your iPhone's magnetometer to detect it in seconds, before you pay for a service you don't need.
WATCH COLLECTION
Keep a watch box in your pocket: per-watch lift angle and beat rate, full measurement history, saved positional runs, accuracy readings, and re-viewable traces for every session. Everything syncs through your own iCloud account, so your collection follows you to every device.
BUILT FOR WATCH PEOPLE
• A library of 104 movements — Seiko, ETA, Sellita, Miyota, Rolex, Omega, Longines, Citizen, Hamilton, Grand Seiko, Tudor and more — each with the right lift angle and beat rate already set
• Set the lift angle by hand for anything not listed (default 52°)
• Pin a nominal beat rate for unusual movements
• Dark, instrument-grade interface with iOS 26 Liquid Glass design
• Demo movement mode so you can explore every feature without a watch
• An animated escapement in Settings that shows exactly what you're hearing
WHAT YOU NEED
A quiet room and a mechanical watch (hand-wound or automatic). Quartz watches don't tick the same way and aren't supported — Chronolyze recognises one and says so rather than reporting nonsense. For best results, rest the watch case directly against the bottom edge of the phone.
Whether you're regulating your own movements, checking a vintage find before you buy, or just curious how your daily wearer is doing — Chronolyze gives you watchmaker-grade numbers from the phone already in your pocket.
Show more
