Nefunguje, jsem naštvaná, nedoporučuji.
Aplikace absolutně nefunguje, neudrží žádné světla déle než několik minut, cítím se být opravdu podvedená, mám 5 světel a jen starosti! Vše musím ovládat manuálně.. Nechapu jak může takto velký výrobce kašlat na své klienty..
Necessita de updates
Necessita de mais updates pra deixar excelente.
*Adicionem a opção reset preset na seção COLOR.
*Adicionem a opção export preset
*Adicionem a opção reset preset na seção COLOR.
*Adicionem a opção export preset
Lose ALL Lights After App Update!
EVERY TIME I update your stupid app I lose all my lights and I have to re-pair them with the app!!!! With the fact that the lights are hung on the ceiling and hard to access make it annoying as HECK!!! FIX THIS STUPID ISSUE!!!
Перестал работать функционал.
Почему перестал работать ползунок изменения цветовой температуры, когда 2 прибора добавляешь в группу ? По одному работает как раньше. Что за прикол?
繋がらない
まったく繋がらない
more slow rate mode
I would like to set the rate more slowly. Example: rate lv0.5 or 0.1 . I also want a mode where the color changes slowly with a gradation every 5 seconds.
Great products, bad app
It’s very sad to always have difficulties to connect your lights to this app, it never works correctly disconnect every time, and have troubles to find new products.
app does not work, returning lights
app will not connect to my brand new lights, going to return them :/
App is a joke.
I am having the exact same issue as the previous review. The app sees the two devices, but when I try to add them to a scene, it says “Check to make sure devices are in pairing mode,” even though the devices are recognized and it says “paired” on the screen of the lights.
Ok!
UX deixa um pouco a desejar mas funcionou perfeitamente para mim com a CL60
Супер!
Ребята! Спасибо за отличную технику и хорошее приложение! Действительно очень удобно!
Não conecta no celular
Não conecta via Bluetooth.
Colbor CL 60 will NOT pair with app
I can see the light as others have mentioned, but the light will not be added to a scene when selected
ライトは優秀なのに。
全然使い方がわからない。
以前はCL60で使えていたのに使えなくなった。
マニュアルも無いのでそもそもライトと接続すら出来ない。
似た商品のamaranはアプリがしっかりしているのでせっかく物はいいのにアプリで大差がついてしまっているのが非常に残念。
以前はCL60で使えていたのに使えなくなった。
マニュアルも無いのでそもそもライトと接続すら出来ない。
似た商品のamaranはアプリがしっかりしているのでせっかく物はいいのにアプリで大差がついてしまっているのが非常に残念。
繋がらない
アップデートしたらCL100xに繋がらなくなった。最低アプリ
Really clumsy
All fixture are detected in "add fixture" but never populate into the inventory or into the console.
Have to run them manually, absolutely anoying.
Have to run them manually, absolutely anoying.
The application is full of bugs and has no interest for me at the moment.
I bought 4 lamps and the app only works for intensity nothing else. Lots of bugs. For example, if I try to change the temperature, the intensity changes and the color automatically switches to 5600k.
Sometimes, all the lamps change intensity at the same time, and I have to reset the lamps as they came out of the factory (press the 2 buttons/knobs for 5 seconds).
The user manual on the site is made up of images rather than text, which makes it impossible to translate into French.
What's more, the instructions do not correspond to the current interface, and are not updated.
Very, very disappointed. I'm waiting for an improved version that actually works. There's so much potential, it's a real shame.
----
J'ai acheté 4 lampes et l'application fonctionne uniquement pour l'intensité rien d'autres. Beaucoup de bugs. Par exemple si j'essaye de changer la température, c'est l'intensité qui change et la couleur passe automatique en 5600k.
Parfois, c'est toutes les lampes qui changent d'intensité en même temps et je dois réinitialiser les lampes comme en sortie d'usine. ( 5 sec les 2 boutons/molettes appuyés)
Le mode d'emploi sur le site est fait d'images et non de texte ce qui empêche la traduction en français.
De plus le mode d'emploi ne correspond pas à l'interface actuelle, il n'est pas mis à jour.
Très très déçu. J'attends une version améliorée et surtout qui fonctionne. Il y a un grand potentiel, c'est vraiment dommage.
Sometimes, all the lamps change intensity at the same time, and I have to reset the lamps as they came out of the factory (press the 2 buttons/knobs for 5 seconds).
The user manual on the site is made up of images rather than text, which makes it impossible to translate into French.
What's more, the instructions do not correspond to the current interface, and are not updated.
Very, very disappointed. I'm waiting for an improved version that actually works. There's so much potential, it's a real shame.
----
J'ai acheté 4 lampes et l'application fonctionne uniquement pour l'intensité rien d'autres. Beaucoup de bugs. Par exemple si j'essaye de changer la température, c'est l'intensité qui change et la couleur passe automatique en 5600k.
Parfois, c'est toutes les lampes qui changent d'intensité en même temps et je dois réinitialiser les lampes comme en sortie d'usine. ( 5 sec les 2 boutons/molettes appuyés)
Le mode d'emploi sur le site est fait d'images et non de texte ce qui empêche la traduction en français.
De plus le mode d'emploi ne correspond pas à l'interface actuelle, il n'est pas mis à jour.
Très très déçu. J'attends une version améliorée et surtout qui fonctionne. Il y a un grand potentiel, c'est vraiment dommage.
Show more
bad update
it was very bad, not very intuitive, more complicated to use, connection errors, button commands with “bug”
COLBOR 60R not pairing with App
The App does not find the light fixtures. It is a waste of time to try.
Hey guys, revert to tye old version!
There's no shame on reverting to the old version. I really don't know what is the value on this version because it doesn't work. I was using the previous version with great success but after the update it doesn't work anymore. So please revert or make this work.
