CutList Optimizer User Reviews

Name: CutList Optimizer
Rating: 4.3 (110 reviews)

CutList Optimizer

CutList Optimal

🔧 Utilities

📊 Productivity

Customer Experience

Positive experience42.9% of reviews

Neutral9.5% of reviews

Negative experience47.6% of reviews

~ Based on 21 written reviews from the US App Store.

Is CutList Optimizer Safe?

CutList Optimizer appears mostly safe based on user ratings. AppsHunter Safety Score for CutList Optimizer is 84/100.

This assessment is based on 110 user ratings, with an App Store average of 4.3/5.

Safety Analysis

80.0% of ratings point to a safe experience

2.7% of ratings suggest some concerns

17.3% of ratings point to a risky experience

~ Based on 110 App Store ratings for CutList Optimizer.

Is CutList Optimizer Legit?

CutList Optimizer appears to be a legitimate app. AppsHunter Legitimacy Score for CutList Optimizer is 90/100.

Based on 90 of 100 points across 7 verification signals from App Store and developer data.

Top reviews

Most Recent Highest Rated Lowest Rated

Only three free projects

This App. Only allows the user to make 3 free projects then you have to buy the App. My version did not allow me to change from mm to inches. Don’t waste time or money on this App.

EN Newman

24 days ago

Response from developer

You can change the measurement unit from millimeters to inches in the app’s option. If you’re unable to find this option, please contact us through the in-app support feature, and we’ll be happy to assist you.

MISE EN PAGE A REVOIR

En cas de petites pièces sur un panneau, la nomenclature devient illisible sur les visuels

EMRCGNC

2 months ago

Response from developer

Vous pouvez ajuster la taille du texte, et les couleurs des pièces peuvent également être affichées dans le PDF. Si cela ne vous semble toujours pas assez lisible, n’hésitez pas à nous contacter directement depuis l’application.

Sucks

This app sucks. I put everything in, pressed the play button, and it showed all the input but no image for the plywood cuts. I tried it several times, and it used up one of my free tries each time even though nothing had changed in my input. What a complete waste of time.

iOs issues

2 months ago

Response from developer

We’re very sorry for the issue. Please contact us through the in-app support option and share your input details. We’ll check it right away and get back to you as soon as possible. Thank you for letting us know.

Best so far

Tried a few different apps, this one best so far

Ted33414

2 months ago

Naze

On ne peut pas se connecter à son compte

errety

4 months ago

Good App

The app is substantially cheaper than the desktop version but there is no user login so you can’t use the app as a subscriber.

NikkiLee1992mo2

4 months ago

Poor value

In world of subscription based apps. This is no different, just another company trying to bleed its customers for every penny. In the world of Ai why would anyone waste their money on this app? Get out of the subscription model and maybe but for now. It is time for Ai.

Trickman2

5 months ago

Response from developer

Thank you for your feedback. We understand that many users have concerns about subscription models, so the app also provides a limited number of free uses so users can try the main features first. Subscriptions help support ongoing development, algorithm improvements, and long-term maintenance. While AI tools are growing rapidly, efficient cutting optimization still requires specialized algorithms designed for real manufacturing scenarios. We will continue improving the app to provide better value for our users.

Ewen

Je mets seulement une étoile parce que je trouve que après quelques explications mon prof m’a dit que tout était faux, du coup j’ai dû recommencer, recommencer, recommencer, recommencer, recommencer. Puis après ça m’a dit de payer 40 € par année et moi je gagne pas dix euros par mois.

Ewen_trnlc

8 months ago

Response from developer

Si vous le souhaitez, merci de nous contacter directement depuis l’application. Je serai ravi de vous aider à vérifier les paramètres ou la méthode d’utilisation afin d’éviter des répétitions inutiles.

Good

App is good. I reached out to customer service, about an issue I was having recalculating after making changes to settings. It took a few days to get it figured out but they did help me. Having to change setting through the gear icon to get changes to update instead of being using the setting tab that is on the screen when you are looking at your cut diagram is a little frustrating but it works. It would be nice to have a recalculate button or have the setting tab on the cutlist screen update instead of having to exit out of that screen. But otherwise I like the app and cutlist are easy to export to mark up or to print.

kirk491

10 months ago

Response from developer

Thank you very much for your feedback! We’re glad the issue was resolved and appreciate your suggestions — we’ll consider improving the recalculation process in future updates.

Very frustrating

Customer service is garbage. There is no recalculate button and no matter what changes I make in setting it keeps giving me the exact same results. There is no option for prioritizing rip or crosscut just vertical or horizontal stripe cutting. I’m sure that is supposed to be the same thing but the terminology is dumb. No matter which one you choose it always has a cross cut priority. I had high hopes for this app but it is just like everything else. Half hearted developers just trying to make a dollar and don’t really care about the quality of their product or customer base.

kirk491

10 months ago

Response from developer

Thank you for your feedback, and we’re sorry to hear about your experience. The issue you mentioned usually happens when the settings are not saved before recalculation. Also, the “vertical/horizontal” option represents the same idea as rip and crosscut — just different terminology. We’d love to help you get the best results. Please reach out via the “Feedback” section in the app so our team can guide you step-by-step. We truly appreciate your support and are committed to improving the app experience for all users.

5 free calculations

Its a clever app and very handy to be able to use your old peaces of materials with an easy app to navigate, it is a shame it is a subscription based service, i would prefer a one off payment option because this app, i would definitely use for the rest of my life i just don’t want to pay $70 per year. I think its a great idea for an app

RobbieBC

2 years ago

Way too limiting

This seems like a good app, but we’re only given five free tries to decide. It took all five before I finally figured out how to use it, but by then I had to pay to continue. What a waste! The industry standard for apps like this seems to be to give users a few days to figure it out, not a few attempts. Since I’m still not sure this will work for me after my free “trial” I’ll be checking out the competitors. Or maybe I’ll just stick to pen and paper. Trying to find a useful alternative is proving to be a waste of time. It seems no one has made a good app yet to perform this function.

Bhoelle1809

2 years ago

Response from developer

Hi, Thank you for sharing your thoughts and for giving our app a try. We’re sorry to hear that your free trial ended before you had the chance to fully explore all the features. We truly appreciate your feedback — we understand that learning a new tool can take a few attempts, and we’ll review how we can make the trial experience more user-friendly in future updates. If you’d like, please reach out to us through the “Feedback” option in the app — we’d be happy to guide you through the setup so you can see the app’s full potential before making a decision. Thank you again for your honest feedback and for helping us improve!

Улучшение

Прошу добавить возможность добавления кромки по краям деталей. Желательно, чтобы можно было добавить 2 вида кромки с разной толщиной. В этом случае в файле DXF размер детали должен уменьшаться на толщину кромки. В остальном всё хорошо👍

ivvos cnc

2 years ago

Response from developer

Здравствуйте, эта функция была добавлена. Пожалуйста, обновитесь до последней версии. Если у вас есть другие запросы, не стесняйтесь обращаться к нам в любое время. Спасибо за вашу поддержку.

Do not have fractional unit mode

In this aap the do not add faction size type like 30 3/4 or other

Haiwiwkww

2 years ago

Response from developer

Hello, this feature has been added. Please update to the latest version. If you have any other requests, feel free to contact us anytime. Thank you for your support.

Bonne application

L’application est bien avec un support technique réactif.

Merci

Fafsp.

2 years ago

Response from developer

Nous sommes désolés pour cette mauvaise expérience. Veuillez nous contacter via l'application et nous réglerons votre problème dans les plus brefs délais.

Decepção

Na versão do Android o aplicativo possui uma série de recursos, como: polegada fracionada; cortes que levam fita e muito mais. Na versão do IOS os recursos são extremamente limitados.

Rodrigo Aragão

2 years ago

Response from developer

Agradecemos pelo seu feedback e apoio. Essas funcionalidades já estão nos nossos planos. Pedimos que tenha paciência. Obrigado!

best

nest

best 2 vfd

2 years ago

Response from developer

Thank you for your support.

bien

bein

said design

2 years ago

Response from developer

Thank you for your support.

Missing stock selection for parts

Great app otherwise and easy to use!

Maybe add a thickness option to parts to help assign what stock material dynamically

Chry5alid

2 years ago

Response from developer

Hello, this feature has been added. Please update to the latest version. If you have any other requests, feel free to contact us anytime. Thank you for your support.

Only one thickness allowed

No way to create new stock thicknesses so they can be on their own cultist plan. Appears this only lets you put in length and width only. No good for multiple part projects.

Whanga-surfer