Electric Master: NEC Panel

NEW: Missions, the new center tab. Learn safe isolation, testing, fault finding, wiring, motors and solar the fun way — 25 story missions with real procedures and ridiculous stakes, from a candlelit dinner to a telenovela in the pump room. Play under NEC, CEC, BS 7671 or DIN VDE. Come back for the Daily Challenge and its streak, replay remixes where the fault moves, climb the career ranks, and turn on Hints in Guided mode when you're stuck. Plays with VoiceOver and at the largest text sizes. Every disaster lands in the Disaster Gallery — in the game, never on the job. NEC and CEC panels that look like the real thing • The Panel is drawn like a real load center: breakers seated on the bus, neutral and ground bars, circuit numbers and labels, SPARE and SPACE. The meter socket, disconnects, transfer switch, surge protection and a generator interlock kit are drawn beside or on the panel. • “Wire this circuit” or “Wire all” dresses the conductors down the gutter to their lugs and bar screws, with sleeves and jacket print. • The PDF prints a professional set: the dead front with a door-card circuit directory, the wiring page with conductor identification, and a conductor schedule, on Letter or ANSI B. • Every breaker sits in exactly the spaces the Schedule gives it, and dragging shows only the spaces it can take. Panels saved earlier are never changed for you: overlaps are outlined in red, with a one-tap Re-seat. • Schematic for NEC and CEC panels (beta): legs A, B and C, neutral and ground, AWG conductors such as 12/2 w/G, GFCI, AFCI and dual-function breakers. Free to view; export on ANSI B or Letter with Pro. Selectivity, rebuilt • Pick the real device from the manufacturer's range; its rating, breaking capacity and settings carry over. • Results update live, with a reason for every pair. • Your diagram is saved and reopens from History. PDFs include the diagram and the trip curves. New calculators • 15 new Pro tools: Panel Balance, OCPD Sizing, Taps & Bonding, Max Demand, Circuit Check / Circuit Sizer, HVAC Nameplate, Solar PV, Motors & Generators, Cable Pulling, Lighting, Cable Tray, Test Limits, Arc Flash, Enclosure Heat and Reference. • Two new free tools: Tape Calculator and Trade Converter. • EV Charger now follows every standard: NEC, CEC, BS 7671 and DIN VDE. Fault Current now works natively under BS 7671 and DIN VDE. Also new: the app is now available in Turkish.