Keeps “loosing track”
Every time I use it, just keeps saying lost track, then I would click to scan and it would fail in less than a second. Would do front of the face AT MOST and when I moved slightly it would fail again. Looked at tutorials and all. Had high hopes.
Too expensive
Far too expensive especially when you don’t even get a free trial
Worst app I ever used
It’s not working at all, the app only works in portrait mode but camera still recording in landscape mode, which results in mirrored scanning. That aside scanning quality is so poor you can’t even recognise the model after scanning
Gives up tracking too easy
Flat surfaces like a vehicle door - it gives up on trying to capture and starts rendering. The surface was dulled with powder, so I can capture it in other programs . Idk if it’s a perspective thing with user and front camera . But it should stop giving up tracking so easily, if possible a mode where it accepts more flaws would be better . 4 foot by 3-5 feet . With a curve of 64 degrees. Because it tracks really good, but just gives up too much.
Show more
iPhone 17 Support please
Orientation ist wrong on iPhone 17
iPhone 17
The app won’t work if you have the new iPhone 17. I guess due to the new front camera. The infrared scanner is turned 90 degrees
Loin d’être achevé
Cette app n’utilise que la caméra frontale. Pas de LiDAR, pas de caméra arrière, pas très pratique ni utile
Ziemlich beeindruckend
Die App hat definitiv mehr wie die aktuell 2,9 Sterne verdient. Ich habe die App erstmal getestet und dann mehr oder weniger blind die 23 Euro für die Vollversion bezahlt. Es wäre schön gewesen, wenn man zumindest 1 oder 2 Exporte in einem beliebigen Format frei hätte. Ich habe doch erstmal ein wenig gezögert. Aber jetzt bin ich froh, dass ich trotz der schlechten Bewertungen den Preis gezahlt habe. Die Ergebnisse übertreffen alles was ich erwartet habe um ein vielfaches. Ich habe zum Test einfach mal meine Dell Maus auf einem selbst gedruckten Drehteller mit Referenzmarkern gescannt. Man muss ein wenig Geduld und ein ruhiges Händchen haben, dann klappt das eigentlich ganz gut. Das Ergebnis sah nach dem ersten Versuch ganz vielversprechend aus, also habe ich die 23 Euro gezahlt und eine Punktewolke per Airdrop an mein Macbook gesendet. Diese konnte ich dann in die Software Revo Scan 5 importieren und nachbearbeiten. Und was soll ich sagen: Das Ergebnis ist ein maßgetreues perfektes Abbild meiner Dell Maus. Was will ich mehr? Genutzt habe ich dafür ein ziemlich altes iPad Pro 11“ von 2018 mit der Face ID Kamera. Schade, dass ich mir schon einen Creality Ferret SE Scanner bestellt habe. Den benötige ich jetzt eigentlich nicht mehr. Den Umweg über Revo Scan braucht man nicht zwangsläufig. Man bekommt auch schon ganz passable STL Dateien direkt aus der App raus, die man dann im Slicer (z.B. Bambu Studio/Orca Slicer) nachbearbeiten kann.
Show more
All features are paid
You can’t export anything without paying.
Broken
This app seems to have at one point made great models, but it is currently broken and will just lose tracking in the middle of a scan regardless of how fast or slow you move the camera.
Response from developer
Please contact support if you're having trouble scanning certain models. We can provide tips. EM3D won't be able to handle all kinds of subjects. It is best suited for scanning feature rich organic objects roughly the size of a human head.
Can’t get any kind of support
Purchased this software on my wife’s phone since she had the supported hardware. I later got the supported hardware and tried to restore purchase. Since I bought it on my wife’s phone It should support family sharing, but restoring purchases doesn’t work. I posted on every available site and no response. This guy wrote a piece of software and dumped it on the App Store and doesn’t care.
Show more
Should not be charging for this kind of quality
Asking for $7 to export and STL of the scan that 1. Isn’t easy to scan. There’s no filters on distance so good luck if you’re trying to hold something while scanning it or trying to check the camera. My arm is in every STL so the scan is huge for a small object. Super inconvenient.
2. I have no way of knowing it’s a good STL. Like I said, there’s no distance limit so who knows who dimensionally accurate or how detailed the scan is. If there was at least a free trial or like 5 free exports I’d happily pay for it if it’s good quality and I can confirm that. But I can’t confirm that. And the user experience to scan the object is really bad.
Shame too, this is like the only app not requiring lidar and using the laser scanner for better accessibility and dimensions. $7 or $20 is a fair price if I knew it worked and helped my workflow. Just don’t know if it helps if I can’t export a scan at least once.
2. I have no way of knowing it’s a good STL. Like I said, there’s no distance limit so who knows who dimensionally accurate or how detailed the scan is. If there was at least a free trial or like 5 free exports I’d happily pay for it if it’s good quality and I can confirm that. But I can’t confirm that. And the user experience to scan the object is really bad.
Shame too, this is like the only app not requiring lidar and using the laser scanner for better accessibility and dimensions. $7 or $20 is a fair price if I knew it worked and helped my workflow. Just don’t know if it helps if I can’t export a scan at least once.
Show more
Response from developer
Put the object you're trying to scan on a tripod or turntable. Use the "Toggle Mesh" feature to preview the mesh inside the app before unlocking the export feature. Thank you for the feedback.
Don’t Bother Using
Never Write Reviews. Overly Advertised as a good 3d scanner for phones (head scans in particular) but is impossible to use and even when you get a decent scan the app CRASHES. Would NEVER recommend unless ready for headache.
Not working.
I got the app and it keeps always saying “ not working “ I did it in open and closed faces , still not working at all
I’m really disappointed
I’m really disappointed
Paywall limited
It’s honestly a fairly accurate, no nonsense scanner. Limiting its functionality to a party trick by paywall locking all export options is a little annoying though.
Horrible
I’m so glad this was free because I can’t get a single decent scan. I have a new phone, the pro edition, and I have the lights perfect and using mirror option to insure aim. ALWAYS looses tracking.
Can’t Get a Single Successful Scan
Fails constantly. Am I moving too fast? Am I moving too slow? Is it too far away? Is it too close? No idea. But I’ve tried everything to get one scan and I can’t. I can’t see the screen when scanning (I know, limitation of the phone tech) so I tried the mirror feature on my iPad. Still couldn’t get a good scan. Would fail instantly. I even paid for the obj export feature. Extremely disappointed.
Show more
Response from developer
EM3D won't be able to handle all kinds of subjects. It is best suited for scanning feature rich organic objects roughly the size of a human head. Ensure that your sensor and camera are clean before starting. You should ensure that you get a good scan before paying to unlock exports.
Never works
Just keep saying lost tracing
Non si possono acquistare le esportazioni
Peccato perché sembra funzionare bene (anche se è un po’ difficile da utilizzare senza perdere il tracking).
Metto una stella per ora perché , quando provo ad acquistare l’esportazione in formato obj oppure in stl mi compare l’errore “unable to purchase at this time. Please check your internet connection”
Il problema è che sia in Wi-Fi che tramite connessione dati, continua a non far acquistare
Metto una stella per ora perché , quando provo ad acquistare l’esportazione in formato obj oppure in stl mi compare l’errore “unable to purchase at this time. Please check your internet connection”
Il problema è che sia in Wi-Fi che tramite connessione dati, continua a non far acquistare
Show more
Does not work as easily as advertised
Don’t waste your money. This is a neat idea but is poorly executed.
