
FFT & RTA Analyzer: Peakhold
dB Meter, LUFS & Spectrum
0 ratings
Free
Rating summary
About
Measure, analyze and set up your sound with one free app: an FFT and RTA analyzer, a dB meter, a LUFS loudness meter, an oscilloscope and a signal generator, plus Hi-Fi listening tools and guided setup for studio monitors and rooms.
SOUND LEVEL METER
• Decibel meter with A, C and Z weighting and Fast, Slow and Impulse response
• Leq, max, min, peak and L10, L50, L90, with Leq logging for long sessions
• Every reading shows its accuracy: Estimated, Calibrated or Measurement mic
FFT SPECTRUM ANALYZER
• 1,024 to 65,536-point FFT, 13 windows, averaging and peak hold, with the note under your finger
RTA, SPECTROGRAM AND RING FINDER
• Octave to 1/48-octave bands, with a band table and a 31-band graphic EQ view
• Spectrogram: frequency over time
• Ring Finder: finds feedback, with the note and a notch
LUFS LOUDNESS METER
• ITU-R BS.1770 and EBU R128: momentary, short-term and integrated LUFS, loudness range and true peak
• Targets for streaming (-14 LUFS), Apple Music (-16), EBU R128 (-23) and ATSC A/85 (-24), and what Spotify, YouTube and others would do to your master
OSCILLOSCOPE, DISTORTION AND TUNER
• Scope with Auto, Normal and Single trigger and time cursors
• THD and THD+N with a harmonic chart, plus goniometer and phase correlation
• Tuner with a needle or strobe display, plus tap tempo and calculators for delay, distance and more
SIGNAL GENERATOR
• Sine, square, triangle and saw; pink, white, brown and band noise
• Log and linear sweeps, tone bursts, multi-tone and a polarity pulse
HI-FI LISTENING TOOLS
• Blind ABX Test: loudness-matched trials, with the odds that your score was luck
• True Resolution: checks whether a hi-res file is really hi-res
• DR Meter, Bit-Perfect Check and Channel Balance (level and crosstalk)
• Turntable Speed: speed error, wow and flutter from a test record
• Headphone Response against a target curve, with EQ. Needs wired headphones and a measurement microphone
• Listening Position, Speaker Break-in and Crossfeed
MUSIC TOOLS (iOS 27 / macOS 27)
• Song Analysis: tempo (BPM), key, meter, sections, beats and loudness on a timeline you can play
• DJ Transitions: find songs that mix well together by key and tempo
• Practice: loop a section with a count-in
WIDGETS AND LIVE ACTIVITIES
• Home Screen and Lock Screen widgets: room level, RTA, recorder, generator, tuner and pitch pipe
• Live Activities with a Stop button, and a Control Center tuner button
FILES AND MIXES
• Recorder: 32-bit float WAV with markers
• File Analyzer: LUFS, true peak, clipping, spectrogram and a PDF report for WAV, AIFF, MP3, AAC, ALAC and FLAC
• Reference Compare: set your mix against reference tracks, loudness-matched
STUDIO AND ROOM SETUP
• Studio Setup: a guided session from layout to verified EQ, ending in a PDF report
• Angle & Level, Arrival Delay, Polarity, Level Match and Sub Alignment
• EQ Advisor: monitor switch settings plus cut-only parametric and graphic room EQ
• Room Acoustics: decay times (EDT, T20, T30), clarity and room modes per ISO 3382
• Room Scan: scan with LiDAR or the camera to see first-reflection points (iPhone and iPad)
MEASURE YOUR GEAR
• Transfer Function: magnitude, phase and coherence
• Interface Test: latency, response, THD+N and noise floor through a loopback cable
NOISE EXPOSURE AND EARS
• Dosimeter: OSHA and NIOSH dose, TWA and EU LEX,8h
• Hearing Check (not a hearing test) and Ear Training
DAW, SHORTCUTS AND SIRI
• AUv3 plug-ins for Logic Pro, GarageBand and AUM: Analyzer, Reference and Test Signal
• Shortcuts and Siri: measure sound level, record, start the dosimeter, play pink noise
CALIBRATION
• Calibrate with an acoustic calibrator, a reference meter or a calibration file, saved per microphone
PRIVATE BY DESIGN
Audio is analyzed on your device. Nothing is sent anywhere unless you share a result. No ads, no account, no data collected.
A phone's microphone isn't a certified sound level meter. For legal or health-and-safety measurements, use a Class 1 or Class 2 meter.
Show more
+1
What's New in FFT & RTA Analyzer
1.0
November 15, 2026









