
FieldCalc: Framing & Carpentry
Pro Construction Calculator
0 ratings
Free
In-App Purchases
Rating summary
About
Framing and carpentry math built for the job site — stairs, rafters, rake walls, crown molding, materials — with live drawings that update as you type.
Works offline, with no signal. No account. No ads. Nothing leaves your phone.
The essentials are free forever, including a live pitch meter: lay your phone on a roof and read the slope.
Everything else unlocks for $9.99, one time. No subscription. The leading app charges $39.99/year (or $4.99/month) — FieldCalc pays for itself before your first year is up.
FREE FOREVER
• Feet-Inch-Fraction Calculator — add, subtract, multiply and divide down to 1/16" on a custom keypad, with a running tape of every step.
• Right Triangle Solver — any 2 of rise, run or diagonal gives all 3, plus pitch (X:12), angle and percent grade.
• Pitch Meter — lay your iPhone flat on a roof, ramp or stair. Read X:12, degrees and percent grade live. Tap to lock.
• Pitch Converter — type X:12, degrees or percent grade and get the other two.
• Compound Miter — blade tilt and miter angle for crown, with 38°, 45° and 52° presets.
• Stud Count — wall length and spacing in, count out.
• Board Feet — lumber size, length and quantity in, board feet out.
• Concrete — slab, footing or column in cubic yards and 60/80 lb bags.
• Drywall — sheets with waste, screws, tape and compound.
• Area & Volume — areas of rectangles, circles, triangles and trapezoids; volumes of boxes, cylinders, cones and spheres.
• Projects — save any calculation to a named project, one per job.
PRO UNLOCK — $9.99 ONE TIME
FRAMING
• Stairs — riser count and height, stringer length, angle and headroom, with a live stringer drawing and IRC check.
• Common Rafter — length, ridge cut, birdsmouth, tail and plumb cut, with a live rafter drawing.
• Hip/Valley and Jack Rafters — hip length, backing angle, cheek cuts, jack lengths and side cuts.
• Rake Wall — a full stud cut list for any pitch and OC spacing.
• Balusters — count, exact spacing and start position for a max gap.
• Circle / Arc — any 2 of arc length, angle, diameter, chord or rise gives the rest. For arched windows and curved walls.
• Polygon — miter angle per joint and every dimension, for gazebos and octagonal rooms.
MATERIALS
• Roof Area — squares, sheets and shingle bundles
• Siding & Paneling — sheet or lap siding with course count
• Framing Lumber — studs, corners, tees, plates, board feet and cost
• Cost Per Unit — leave one field blank and it solves for it
• Weight Per Volume — concrete, gravel, sand, soil and more in pounds, tons and truck loads
PDF EXPORT
• Export stair, rafter and rake wall drawings as PDFs — the rake wall includes its stud cut list.
ALSO
• Two themes: Stealth Pro (true black, for glare in direct sun) and Circuit Bold (high-contrast light).
• Restore Purchases on any paywall screen if you change phones.
IMPORTANT
FieldCalc is a reference and estimation tool. Verify all results with a licensed contractor, engineer or building official before construction. Code compliance is the responsibility of the contractor and project owner. Not a substitute for engineered or stamped plans.
Requires iOS 17.0 or later. Free to download; one optional $9.99 unlock.
Show more
+1
What's New in FieldCalc
1.0
November 11, 2026
1
Subscriptions & In-App Purchases
$9.99
FieldCalc Pro Unlock
Unlock all Pro calculators, PDF export, and Projects.






