
Flange Joint Inspection Studio
Bolt maps & assembly sign-off
0 ratings
Free
In-App Purchases
Rating summary
About
Flange Joint Inspection Studio is a field record for bolted flange joints. Register each joint once, open its numbered bolt circle, and keep everything that happens to it — preparation, assembly, every tightening pass, inspections, component changes and reassembly — in one place you can export.
PROJECTS AND JOINTS
- Projects with a site hierarchy: plant, area, system, equipment, line
- Joint register with line and equipment references, flange type, size, class, standard, material, face and bolting — leave anything unknown empty
- Each specification shows its source: manufacturer, drawing, procedure, user entered or unknown
- Search across codes, lines, equipment and locations
THE BOLT CIRCLE
- An accurate diagram for 3 to 96 bolt positions: bolt 1 at the top, numbered clockwise, equal spacing
- Tap any bolt for its condition history, its value on each pass and its opposite bolt
- The sequence you record from your procedure is shown as step badges on the circle
TIGHTENING RECORDS
- Every record is tied to your approved procedure reference and revision
- Multiple passes, each with the target and limits you enter from the procedure
- Per-bolt values in N·m, ft·lbf, in·lbf, kgf·m or a named unit of your own
- Inclusive comparison against your entered limits; missing positions are always listed
- Corrections never overwrite: the original value stays, with the reason in the audit history
ASSEMBLY VERIFICATION
- A twelve-statement checklist per assembly cycle: flange faces, gasket, bolts, nuts and lubricant, fit-up before tightening
- Answer Confirmed, Not confirmed or Not applicable; anything not answered stays recorded as not checked
- Every Not confirmed answer needs a note before the record can be signed off by name
- A signed verification is locked; a later change is a new verification, so the first one is kept
- Shows what is already on file for the joint, without judging it
- Bolt-up entry follows your recorded sequence, one position at a time; a reinspection links to the finding it follows up
INSPECTIONS AND COMPONENTS
- Inspections by area with findings, follow-up, next date and photographs
- Statuses: No issue observed, Attention required, Follow-up required, Removed from service
- Gaskets, bolts, nuts, washers and lubricant with batch and source; replacements keep history
- Joint lifecycle across assembly cycles: registered, prepared, assembled, in service, disassembled, reassembled, archived
TOOLS, COSTS AND REPORTS
- Tool register with serial numbers and recorded calibration dates, linked to each tightening record (Pro)
- Service costs in any ISO 4217 currency, totalled per currency — never mixed
- PDF reports: assembly verification, joint dossier, bolt arrangement diagram, tightening pass record, inspection, component register, maintenance history, tool traceability, project joint register, open findings
- QR joint labels and label sheets; scan a label to open the joint
- CSV export and versioned, checksummed backup with merge or replace restore
FREE AND LIFETIME PRO
Free: 1 project, 5 joints, 10 tightening and inspection records, the interactive bolt circle, the bolt diagram and tightening record PDFs, the joint register CSV.
Lifetime Pro (one purchase, no subscription): unlimited projects, joints and records, joint dossiers and all PDF reports, QR label sheets, the tool register, cost analytics, full CSV export and company details on reports. Records you create stay yours either way.
IMPORTANT
This is a documentation tool. The verification statements defer to your approved procedure and state no values. It does not calculate or recommend torque, preload or tightening sequences, does not approve procedures or components, does not verify or certify tool calibration, does not claim compliance with any standard and never declares a joint safe. Work to your approved procedure with qualified people.
PRIVACY
No account, no tracking, no ads. Everything stays on your device.
Show more
What's New in Flange Joint Inspection Studio
1.0
November 4, 2026
1
Subscriptions & In-App Purchases
$4.99
Lifetime Pro
Unlimited joints, all reports, tools and CSV









