GutterGuide: Gutter Estimator

Gutter footage before you get out of the truck. Type an address. GutterGuide reads the roof from public 3D elevation data, finds the eaves, and gives you gutter footage, downspout count and a material list in minutes. Then it draws a clean diagram you can show the homeowner. Measurements are estimates from public data. Verify before you order material. BUILT FOR THE DRIVEWAY • Gutter footage on every eave, with corners counted • Downspouts, plus a material list with pipe, elbows, outlets, end caps, miters and hangers • A job price from your own price sheet, waste included (screenshots show sample prices; set your own) • Tap any roof edge to set gutter, rake or none, and edit its length • Include a detected garage or shed with one tap, or add one yourself • Rakes and pitch on screen; ridges, hips and valleys with lengths on the PDF, all as estimates • Saved jobs keep every edit you made YOUR OWN RULES Your prices, waste, corner allowance, downspout spacing and downspout length are all yours to set. Change any number on the spot. DATA MISSED A HOUSE? Trace it yourself: tap the roof corners on the satellite map. Traced measurements are estimates, so verify with a tape before quoting. SHOW THE HOMEOWNER • A clear roof diagram with every run labeled, shared as a one-page PDF Works on U.S. addresses with public elevation data. If it can't read a roof, trace it yourself. Free. No account needed. Uses open data from OpenStreetMap contributors, Microsoft building footprints and USGS.