HoldOveric

HoldOveric

De-icing holdover times

0 ratings
Free

Rating summary

Details

Released
November 5, 2026
Updated
November 9, 2026

Features

HoldOveric screenshot #1 for iPhone
HoldOveric screenshot #2 for iPhone
HoldOveric screenshot #3 for iPhone
HoldOveric screenshot #4 for iPhone
HoldOveric screenshot #5 for iPhone
iphone
ipad
🖼️Get Icon
Icons↘︎

About

HoldOveric gives the holdover time for an aircraft that has been de/anti-iced, from the Transport Canada Holdover Time (HOT) Guidelines, Winter 2026-2027 — and keeps time for you once the fluid is on. SET THE CONDITIONS • Get the latest METAR for any airport by ICAO or IATA code, or paste one in. OAT, visibility and precipitation are filled in for you. • Snowfall intensity comes from the visibility table (Table 57), not from the METAR wording: visibility, outside air temperature and day or night. • Day or night is worked out from the sun at the airport — sunrise and sunset are shown, and you can override it. • Frost, freezing fog, snow, snow with freezing fog, freezing drizzle, light freezing rain, snow with rain, rain on a cold-soaked wing and ice pellets. CHOOSE THE TREATMENT • One-step, two-step or de-icing only. • Type I on aluminium or composite surfaces, generic Type II and Type IV, every listed Type II and Type IV fluid, and Type III by aircraft category. • Only the dilutions a fluid is approved for are offered, and its lowest operational use temperature is checked. • Flaps or slats deployed before treatment: the adjusted 76 % holdover times. • Ice pellets and small hail: allowance times for validated Type III and Type IV fluids, with the rotation speed limits. SEE THE WHOLE RANGE — AND WHERE IT COMES FROM The holdover time stays pinned at the top while you change the inputs. Below it: the table, row and column it came from, the table notes, and what the guidelines say about the lower and upper limit, inspections and Type I. RUN THE CLOCK • Start the timer when the anti-icing step begins. Green before the lower limit, orange when an inspection is needed, red once it is exceeded. • Live Activity on the lock screen and in the Dynamic Island, and a companion Apple Watch app. • Notifications when each limit is reached. • While the timer runs, the METAR is refreshed every ten minutes. Worse conditions lower the holdover time; better conditions keep the original. KEEP A RECORD Every started timer goes into a treatment log on the device: time, airport, METAR, fluid and holdover time. Share a result as text or export the log as CSV. PRIVATE BY DESIGN No account, no analytics, no tracking. The only network request is the METAR, which sends nothing but the airport code. IMPORTANT HoldOveric is for information and training. The current Transport Canada HOT Guidelines, TP 14052 and your operator's approved ground icing program always take precedence, and the pilot in command remains responsible for the aircraft at takeoff. SOURCE Transport Canada Holdover Time (HOT) Guidelines, Winter 2026-2027 (Original Issue, August 11, 2026). Reproduced and adapted with the permission of Transport Canada. This application has not been produced in affiliation with, or with the endorsement of, Transport Canada.
Show more

What's New in HoldOveric

1.3

November 9, 2026

• A cleaner main screen: the holdover time is larger and easier to read, in light and dark mode. • Warnings stand out and the timer status is always shown in full. • Sections are easier to scan, with longer explanations one tap away. • The precipitation option for conditions without a holdover time now says so clearly. Holdover times and data are unchanged.

More

Developer apps