Gute App für IP Kamera.
die App gefällt mir soweit ganz gut, doch ich finde die Tasten zum bewegen der Kamera nicht. Zudem habe ich die App 2 x kaufen müssen, da ich sie einmal in der App selbst freigeschaltet habe. Daher nur vier Sterne.
Parfait!!
Facile à utilisé, j'adore.
Unsupported!!!
This app seems to have been abandoned by the developer.
I used to use it on my Apple TV but it won’t connect to some of my RTSP streams on my newer cameras even in generic mode.
Every other viewer does!
Email to support is ignored.
Don’t waste your money, there’s lots of alternatives.
I used to use it on my Apple TV but it won’t connect to some of my RTSP streams on my newer cameras even in generic mode.
Every other viewer does!
Email to support is ignored.
Don’t waste your money, there’s lots of alternatives.
Einwandfrei
IP Cam Pro läuft einwandfrei unter iOS 16. Die App wird offenbar zeitnah aktualisiert. Sie ist übersichtlich, lässt sich intuitiv bedienen, kann SSL-Verschlüsselung und kommt ohne Cloud aus. Genau was ich gesucht habe. Schön, dass man mit der Lite-Version erst mal kostenlos fast alle Funktionen kostenlos ausprobieren kann. Die Pro-Version ist werbefrei, verzichtet auf Nutzerdatenerfassung, hat einen fairen (Einmal-)Preis ohne Abo und ist ihr Geld wert.
Show more
Doesn’t work on 45mm Apple Watch 7
Fixed. Thank you. Doesn’t work on 45mm Apple Watch 7 Please fix and test. I rely on the app to work on my watch. Now I’m stuck. Using 8.6 os.
Good, but need improvement.
Please add support for the Foscam FI9805EP, Foscam 9821EP, and audio support for non Panasonic cameras.
I would also like to see a way to reorder my cameras in the camera list.
I would also like to see a way to reorder my cameras in the camera list.
Great Application
Great application, with the best watch application in the Apple store. Connection to cameras is very stable. The watch full screen display and standard sizes selection is nice. Also love the auto refresh in watch application, the time between automatic refresh is a little slow though (about 5 to 10 seconds) well done developer 👏
Show more
Die App ist gut bis mittelmäßig, ein Support ist nicht vorhanden
Eine Supportanfrage wurde mir beantwortet mit: Kaufen Sie sich erst einmal die APP, dann werden Sie schon sehen oder benutzen sie ein Forum. Habe die App gekauft -wichtig: kein Update aus der Lite Version durchführen, sondern die Pro Version Kaufen. Sonst bezahlt man zweimal. So wie ich. Die iCloud Synchronisation klappt leider nicht. Habe den Grund noch nicht heraus gefunden.
Show more
Please add support for the Eufy Pan & Tilt
Please add the Eufy brand to your list of supported brands. Also add support of the pan and tilt controls in this app also.
Funktioniert wieder
Leider funktioniert die App seit dem Update vor ein paar Tagen auf Version 9.4 nicht mehr. Es kommt nach dem Start nur ein heller leerer Bildschirm und dann stürzt die App ab. Sowohl auf dem Ipad Pro 9.7 als auch auf dem Ipad Pro 11 Zoll 2018 der gleiche Fehler.
Update 9.8.2019
Ein deinstallieren der App, Neustart des Ipad und Neuinstallation der App, brachte auf beiden Ipads Abhilfe. Nun funktioniert die App wieder einwandfrei!
Update 9.8.2019
Ein deinstallieren der App, Neustart des Ipad und Neuinstallation der App, brachte auf beiden Ipads Abhilfe. Nun funktioniert die App wieder einwandfrei!
Show more
Doesnt deliver as advertised
Had this app for a number of years. I have never been able to display more than 8 camers. If I add a new camera it bumps one of the previous cameras. It allows me to loAd more than 8 but will only display 8
Latest upgrade crashes
Shortly after loading it crashes everytime. Can’t use this app anymore.
Hikvision
Can’t get it to work with hikvision camera
Apple TV app doesn’t work
Cameras sit in “loading” mode with a spinning circle. Other similar apps work just fine. iOS app looks like it was made in the 90s. Save your money.
Works great for D-Link cams
This works perfectly with my D-Link cameras. The Apple Watch version/portion works well also.
Funktioniert mit allen meinen Kameras
Sogar mit den Raspberry-Motion-Kameras.
Und das Neu Feature mit den Kameragruppe ist prima für mich, da ich so zwei Wohnungen getrennt anzeigen kann. Einfach eine gute App, die tut, was sie soll.
Und das Neu Feature mit den Kameragruppe ist prima für mich, da ich so zwei Wohnungen getrennt anzeigen kann. Einfach eine gute App, die tut, was sie soll.
Full of bugs and performance issues.
Firstly my view of this app is based upon personal experience having previous setup of a synology server to monitor various Axis PTZ and Panasonic cameras. The camera setup is the same and was attracted to the app by the remote recording facility and the setup which the latter was very easy. I used it only within my home network and app had to be running constantly to record and not a background recording to a remote server although isn’t advertised to imply this but did make it limited. Found the phone battery went down very quickly.
The usability especially for recording footage is extremely poor.The motion detection lets it down (settings are correct for sensitivity ) missing large vehicles passing but captures no movement very easily and your recorded footage becomes full of no movement recordings and likewise passes this to Dropbox. When it did capture a van within one 30second recording the vehicle was already parked outside the house missing its approach and then like magic the van disappeared and didn’t show the vehicle driving off. Some recording had an overlap image of another camera which obscures the recording. The viewing facility is fine however sporadically fails to turn camera light on/off but can be done via the cameras own url software but not the point.
Only 2* at this time and will be deleting.
The usability especially for recording footage is extremely poor.The motion detection lets it down (settings are correct for sensitivity ) missing large vehicles passing but captures no movement very easily and your recorded footage becomes full of no movement recordings and likewise passes this to Dropbox. When it did capture a van within one 30second recording the vehicle was already parked outside the house missing its approach and then like magic the van disappeared and didn’t show the vehicle driving off. Some recording had an overlap image of another camera which obscures the recording. The viewing facility is fine however sporadically fails to turn camera light on/off but can be done via the cameras own url software but not the point.
Only 2* at this time and will be deleting.
Show more
Funktioniert soweit
Aber man kein Einzelbild auf der Watch darstellen. Immer nur 2 untereinander
Update: Keine Reaktion vom Support
Update: Keine Reaktion vom Support
Response from developer
Danke für ihre Anfrage. Standardmäßig unterstützt Ihre App die Anzeige von 2 Kameras nur auf dem Apple Watch-Bildschirm. Wir werden Ihre Anfrage prüfen und eine Option hinzufügen, um in späteren Updates 1 oder 2 Kameras zu setzen.
TV version buggy
Trendnet models are in support list, but not working. Only simple Foscam cameras work.
Plus, the TV app is losing settings. Waste of money. Regret having bought this “best IP camera viewer on the market”, because it does not even work - at least not on TV.
Hope that Live Cams Pro comes to AppleTV soon.
Plus, the TV app is losing settings. Waste of money. Regret having bought this “best IP camera viewer on the market”, because it does not even work - at least not on TV.
Hope that Live Cams Pro comes to AppleTV soon.
Show more
Response from developer
Hi, We are sorry that you have problem when using our app, please contact our support team via email support@ipcamsoft.com for assistance.
Update one step backwards
Overall this app is great. I'm not only capable to "tap-into" the live stream of my security camera, but also record the live steam footage onto my mobile device. However the latest update has been a step backwards. In that, - as I currently only own one sec. camera, - previous versions of the app had the screen of said camera in "full screen" view right away. Now there isn't that possibility any longer, but instead comes up only in the multi view screen, (left upper corner), which means you have to do a two finger zoom in gesture, in order to show a "full screen" view. Would appreciate if this could get fixed and reversed as functioned before. Thank you.
**UPDATE**
Latest update is prone to crash upon opening. I've encountered easily 4 times of crashing it, before it finally worked and opened correctly. I'm sad to see it, because an older version I used beforehand was rock solid.
**UPDATE**
Latest update is prone to crash upon opening. I've encountered easily 4 times of crashing it, before it finally worked and opened correctly. I'm sad to see it, because an older version I used beforehand was rock solid.
Show more
