
KnobBridge: MIDI Controller
MIDI knobs and buttons for AUM
0 ratings
$5.99 $3.99
↓
Price history
Rating summary
About
Open an old AUM project and you don't know what your hardware knobs do. Start a new one before the controller is on the table. KnobBridge is a small board of named knobs and buttons that lives in the project.
Load KnobBridge in AUM as a MIDI processor and add knobs. Name them, turn them on screen and MIDI-learn your synth's parameters from them. Later, open a knob's sheet, tap Learn and turn the hardware knob. From then on the hardware drives it, the screen follows, and the synth gets the shaped value instead of the raw one.
• Knobs and buttons, named, on a grid you arrange like home-screen icons
• Each control sends one or several CCs, each through its own drawn curve
• Buttons are momentary or toggle, driven by a pad, a key or a tap
• Learn binds any hardware knob or pad; everything unbound passes through untouched
• Knob positions are saved with the project, and nothing is sent until you ask
• A note line per control and a list view: what every knob does, for the whole project
• Undo, VoiceOver, hardware keyboard
KnobBridge sends the same MIDI a hardware controller would, so any app with MIDI learn can follow it.
Show more
What's New in KnobBridge
1.0
November 11, 2026



