Best BLE app for MultiWii and Paris 4
Fast and reliable connection to my Paris 4.0 Sirius BLE - app is well written and the BLE holds connection out to 50m with my Quad. Just need it to work with iNav now.... in the next update
Excellent and Free
I'm using the Naze32 flight controller along with the HM-10 Bluetooth Module. This app just works. Gives you a nice GUI to work with, making configuring and fine tuning your quad very easy to do. The ability share your PID configs right from the app is the icing on the cake. Thank you for keeping this free (other than the non-free app, which isn't as good) for the open source hobby.
If you're buying a Bluetooth module, pickup a FTDL USB to TTL adapter. You will need it to change the BAUD rate of the module to 115200, which is the rate needed to communicate with the Naze32. You can also change the broadcast name and PIN too.
If you're buying a Bluetooth module, pickup a FTDL USB to TTL adapter. You will need it to change the BAUD rate of the module to 115200, which is the rate needed to communicate with the Naze32. You can also change the broadcast name and PIN too.
Show more
Does not have firmware version option
In settings on the firmware version options it only goes up to 2.3 but does not give you the option of choosing 2.4 which is the latest firmware.
Great App
Brilliant app, connected to a HC-10 Bluetooth adapter and gives me all of the info available on my pc's gui with the advantage of being anywhere in flying.
What BLE 4.0 module do we need for IOS8
The app looks very nice, although I have no way to test it without knowing which Bluetooth modules are supported.
Nice work, great interface style
Thank you for taking the time to create and share this work.
Nice interface. Some screens took a little for me to understand but I do like the style that has been implemented. Everything is clearly identified and in a logical order.
I have this working with a cheap HM-10 module with a 5v level shifter (took me a while to set it to 115200 baud with RealTerm) and a Crius AIOP V2. Brilliant, thanks again
Nice interface. Some screens took a little for me to understand but I do like the style that has been implemented. Everything is clearly identified and in a logical order.
I have this working with a cheap HM-10 module with a 5v level shifter (took me a while to set it to 115200 baud with RealTerm) and a Crius AIOP V2. Brilliant, thanks again
Show more
Great free app
App works as expected, only criticism is reading PIDs takes 5secs or so and the 'fast mode' isn't as fast as I was hoping. However even though slight delay in commands (could be my HM-10 module?) it does exactly what the normal configurator does on pc! Tested with Naze32
