Broken
-307 오류가 도대체 뭐죠?
單純更新App， 2026年的月曆範本不會出現
因為開發方回覆是有的，所以我將App整個刪除再重新安裝， 2026的月曆範本就出現了。
如果單純更新App卻不會更新範本的內容，需要移除再安裝，那應該就是一個不小的bug。
蠻有趣的
黏貼效果也可以，不會很容易掉
操作不難
藍芽連不到
What has happened?
Response from developer
Hello fryupoiut Thank you for reaching out! For Nemonic printers, you can simply select the printer from the app and start printing-no separate connection process is needed. The app will handle the connection automatically before printing begins. However, if you encounter any issues, please refer to the following guidance. The troubleshooting steps may vary depending on the model of your printer. ● Nemonic / Nemonic Label Printer If you’re having trouble connecting: 1. On your phone: Go to Settings > Bluetooth > My Devices, tap the i icon next to your Nemonic printer, and choose Forget This Device. 2. Then, under Other Devices, select your Nemonic printer again. 3. Once it appears under My Devices, tap the i icon again and select Disconnect. 4. In the Nemonic app, go to Settings > Reset App Settings > Confirm. 5. Then, go to Settings > Select Printer > Available Printers, and choose your Nemonic printer. 6. Try printing again. ● Nemonic AI Printer Note that you cannot connect this printer through your phone’s settings. 1. In the Nemonic app, go to Settings > Reset App Settings > Confirm. 2. Then go to Settings > Select Printer > Available Printers, and select your Nemonic AI printer. 3. Try printing again. ● Nemonic Mini Printer Please note that this model is not supported on iOS. Should you need any further assistance, feel free to contact us at developer@mangoslab.com. We’ll be happy to help! 😊
常無法配對列印
속 디비져요
卡紙
WONT PRINT
Response from developer
Hello Akjbkjg, Thank you for reaching out! For Nemonic printers, you can simply select the printer from the app and start printing-no separate connection process is needed. The app will handle the connection automatically before printing begins. However, if you encounter any issues, please refer to the following guidance. The troubleshooting steps may vary depending on the model of your printer. ● Nemonic / Nemonic Label Printer If you’re having trouble connecting: 1. On your phone: Go to Settings > Bluetooth > My Devices, tap the i icon next to your Nemonic printer, and choose Forget This Device. 2. Then, under Other Devices, select your Nemonic printer again. 3. Once it appears under My Devices, tap the i icon again and select Disconnect. 4. In the Nemonic app, go to Settings > Reset App Settings > Confirm. 5. Then, go to Settings > Select Printer > Available Printers, and choose your Nemonic printer. 6. Try printing again. ● Nemonic AI Printer Note that you cannot connect this printer through your phone’s settings. 1. In the Nemonic app, go to Settings > Reset App Settings > Confirm. 2. Then go to Settings > Select Printer > Available Printers, and select your Nemonic AI printer. 3. Try printing again. ● Nemonic Mini Printer Please note that this model is not supported on iOS. Should you need any further assistance, feel free to contact us at developer@mangoslab.com. We’ll be happy to help! 😊
좋은데 개선 부탁
근데 어플 사용할 때 세로로 화면이 고정되어있더라구요. 가로로도 변환하면서 쓸수있으면 좋겠어요.
Response from developer
안녕하세요! 가로 모드 지원은 현재 내부 검토 중이며, 더 나은 사용 환경을 위해 개선을 준비하고 있습니다. 소중한 의견 감사드리며, 만족도 높은 네모닉이 되도록 노력하겠습니다 😊
Great and easy to use, but…
I’m usually the last person wanting to sign up for another account. I actually have an email I use when I just don’t want them having my “real” email. It is a real email, it’s my real email, I just never check it because I only use it for these type situations.
But I truly feel this would help this app out a lot.
Response from developer
Hello Too Busy To Be Bothered, Thank you so much for being a long-time user of Nemonic—we truly appreciate your continued support! We’re very sorry to hear about the loss of your notes, and we completely understand how frustrating that must have been. Your feedback is incredibly valuable to us. We’d like to let you know that we’re currently exploring the introduction of an account-based service, particularly through our upcoming Nemonic Memo app. We believe this will help prevent similar data loss and improve your overall experience. Thank you again for your thoughtful input. We’ll keep working hard to make Nemonic even better for everyone! 😊
藍芽一直連不到
希望增加的功能
謝謝製作團隊的用心與設計！
프린터 연결
Response from developer
안녕하세요, 999;;;님! 네모닉 프린터는 기본적으로 앱에서 프린터 선택 후 인쇄를 시도하시면 별도의 연결과정 없이 앱에서 연결을 한 후 인쇄를 합니다. 하지만 문제가 생겼을 경우 아래 내용을 참고하세요! 각 프린터마다 연결에 문제가 있을 경우 해결책이 다릅니다. * 네모닉, 네모닉 라벨 프린터 - 휴대폰 설정 > Bluetooth > 나의 기기 > 네모닉 프린터 기기 옆 i 버튼 > 이 기기 지우기 > 기기 지우기 - 휴대폰 설정 > Bluetooth > 다른 기기 > 네모닉 프린터 기기 선택 - 휴대폰 설정 > Bluetooth > 나의 기기 > 네모닉 프린터 기기 옆 i 버튼 > 연결 해제 - Nemonic 앱 > 설정 > 앱 설정 초기화 > 확인 - Nemonic 앱 > 설정 > 프린터 선택 > 사용 가능 프린터 > 네모닉 프린터 기기 선택 - 인쇄 시도 * 네모닉 AI 프린터 - 휴대폰 설정에서 연결할 수 없습니다. - Nemonic 앱 > 설정 > 앱 설정 초기화 > 확인 - Nemonic 앱 > 설정 > 프린터 선택 > 사용 가능 프린터 > 네모닉 프린터 기기 선택 - 인쇄 시도 * 네모닉 미니 프린터는 iOS에서 사용할 수 없습니다. 추가 문의사항에 대해선 developer@mangoslab.com이나, 고객 센터로 문의주시면 불편을 빠르게 해소해 드릴 수 있도록 최선을 다해 도와드리겠습니다. (Korea) 고객센터 : 1577-6670│이용 시간 (주말 및 공휴일 제외) 평일 10:00 ~ 17:00 점심시간 12:00 ~ 13:00 감사합니다.
Does not print
Response from developer
Hello WALDO-DOC, Thank you for reaching out! For Nemonic printers, you can simply select the printer from the app and start printing-no separate connection process is needed. The app will handle the connection automatically before printing begins. However, if you encounter any issues, please refer to the following guidance. The troubleshooting steps may vary depending on the model of your printer. ● Nemonic / Nemonic Label Printer If you’re having trouble connecting: 1. On your phone: Go to Settings > Bluetooth > My Devices, tap the i icon next to your Nemonic printer, and choose Forget This Device. 2. Then, under Other Devices, select your Nemonic printer again. 3. Once it appears under My Devices, tap the i icon again and select Disconnect. 4. In the Nemonic app, go to Settings > Reset App Settings > Confirm. 5. Then, go to Settings > Select Printer > Available Printers, and choose your Nemonic printer. 6. Try printing again. ● Nemonic AI Printer Note that you cannot connect this printer through your phone’s settings. 1. In the Nemonic app, go to Settings > Reset App Settings > Confirm. 2. Then go to Settings > Select Printer > Available Printers, and select your Nemonic AI printer. 3. Try printing again. ● Nemonic Mini Printer Please note that this model is not supported on iOS. Should you need any further assistance, feel free to contact us at developer@mangoslab.com. We’ll be happy to help! 😊
滿多地方可改進
自由度希望更高一點
App didn’t connect to the printer
Response from developer
Hello tttttttthhdhe, Thank you for reaching out! For Nemonic printers, you can simply select the printer from the app and start printing-no separate connection process is needed. The app will handle the connection automatically before printing begins. However, if you encounter any issues, please refer to the following guidance. The troubleshooting steps may vary depending on the model of your printer. ● Nemonic / Nemonic Label Printer If you’re having trouble connecting: 1. On your phone: Go to Settings > Bluetooth > My Devices, tap the i icon next to your Nemonic printer, and choose Forget This Device. 2. Then, under Other Devices, select your Nemonic printer again. 3. Once it appears under My Devices, tap the i icon again and select Disconnect. 4. In the Nemonic app, go to Settings > Reset App Settings > Confirm. 5. Then, go to Settings > Select Printer > Available Printers, and choose your Nemonic printer. 6. Try printing again. ● Nemonic AI Printer Note that you cannot connect this printer through your phone’s settings. 1. In the Nemonic app, go to Settings > Reset App Settings > Confirm. 2. Then go to Settings > Select Printer > Available Printers, and select your Nemonic AI printer. 3. Try printing again. ● Nemonic Mini Printer Please note that this model is not supported on iOS. Should you need any further assistance, feel free to contact us at developer@mangoslab.com. We’ll be happy to help! 😊
