PA Check – Tone & Analyser

PA Check – Tone & Analyser

RTA, delay, SPL & pink noise

0 ratings
Free
In-App Purchases

Rating summary

Details

Released
October 5, 2026
Updated
November 15, 2026

Features

PA Check – Tone & Analyser screenshot #1 for iPhone
PA Check – Tone & Analyser screenshot #2 for iPhone
PA Check – Tone & Analyser screenshot #3 for iPhone
PA Check – Tone & Analyser screenshot #4 for iPhone
PA Check – Tone & Analyser screenshot #5 for iPhone
PA Check – Tone & Analyser screenshot #6 for iPhone
PA Check – Tone & Analyser screenshot #7 for iPhone
PA Check – Tone & Analyser screenshot #8 for iPhone
PA Check – Tone & Analyser screenshot #9 for iPhone
PA Check – Tone & Analyser screenshot #10 for iPhone
iphone
ipad
🖼️Get Icon
Icons↘︎

About

PA Check is a signal generator and analyser for the soundcheck. Its two large dials for frequency and level can be used with one hand. Changes take effect at once and without clicks. Free: • Sine tone from 20 Hz to 20 kHz. Set the frequency with the dial, or double-tap it and type the value • Pink and white noise • Arrow buttons step in thirds of an octave, matching the bands of a graphic equaliser • Output left, right or stereo, to find a dead channel • Level shown in dBFS. The level stays below −12 dBFS and fades in softly • The signal stops automatically when a cable is pulled or a call comes in. The screen stays on while the signal is running One-time purchase "Analyser and Sweep": • Third-octave analyser with 31 bands from 20 Hz to 20 kHz: play pink noise and read the frequency response of the room • Feedback finder: shows the most prominent frequency in hertz and the third-octave band to pull down on the equaliser • Sweep from 20 Hz to 20 kHz in 12 seconds as a full-screen graph: the curve is drawn while the tone rises. Peaks and dips are marked and labelled, with zoom and landscape view • Several measurements are kept side by side. Step through them, compare them one behind the other in a three-dimensional view, or average them into one curve • With an audio interface: choose the input for the measurement microphone and the output pair (1/2, 3/4 …) • EQ suggestion for a 31-band graphic equaliser from one measurement or the mean of several microphone positions: flat or a live curve, ±6, ±12 or ±15 dB, boosts limited • Transfer function: the measurement microphone against the desk's signal on a second input, or against PA Check's own noise. Magnitude, phase and coherence on one screen, also while the band plays • Delay and polarity of each speaker from the impulse response: keep the main system as the reference and read the value to set on a delay line for every other • Reverberation time (T20) per octave from 125 Hz to 4 kHz, by interrupted noise • Sound level in dB(A): LAF, LAF max, LAeq per minute and the loudest 30 minutes, as DIN 15905-5 counts them, calibrated with a 94 dB calibrator • Calibration files of measurement microphones such as the UMIK-1 are applied to every curve • A report as PDF and CSV for the organiser Note: an iPhone microphone is not calibrated. Without a calibrator, levels are relative to the microphone's full scale; with one, the sound level is a guide, not a certified measurement. Nothing is recorded. No account, no ads, no tracking, no subscription. Works without an internet connection.
Show more

What's New in PA Check

1.1.1

November 15, 2026

After the third measurement you keep, the app asks once whether you would like to rate it: ratings help other engineers find it. Small improvements to the store page.

More
1

Subscriptions & In-App Purchases

$17.99

Analyser and Sweep

31-band analyser, feedback finder, sweep

Developer apps