
Pingscape: Network & Ping
LAN, Wi-Fi, DNS & VPN status
0 ratings
Free
Rating summary
About
See your network clearly.
Pingscape shows what iOS can tell you about your connection: Wi-Fi, cellular, VPN, DNS, proxy, routing and the devices on your local network. It only displays information. It changes nothing on your device or network.
OVERVIEW
Online status, IP address, subnet mask, default gateway, DNS servers and proxy at a glance. If you allow it, also your public IP address and provider.
WI-FI
Network name, BSSID, vendor and security type of the network you are connected to, the latency to your router and what the router says about itself.
VPN AND TUNNELS
See whether a VPN tunnel is active, and its address and MTU.
CELLULAR
The radio technology of each active SIM and the address of your mobile connection.
INTERFACES AND ROUTING
Every network interface with its addresses, MTU and traffic counters, plus the complete routing table.
LAN
Find the devices on your local network with a ping sweep, Bonjour and UPnP, with their names and services.
LIVE
Watch throughput, latency and jitter as they happen, and see when your connection changes.
TOOLS
Ping with packet size and path MTU search, traceroute with a continuous MTR mode, DNS lookup (also over TLS and HTTPS, with DNSSEC and a comparison of servers), whois and RDAP, port check, TLS certificate, HTTP timing with redirects and headers, NAT check via STUN, clock check via NTP, IPv4 against IPv6, subnet calculator and MAC vendor lookup.
SIRI, SHORTCUTS AND WIDGETS
Ask Siri or Shortcuts for any network value: IP address, gateway, DNS servers, Wi-Fi name, VPN and more. Shortcuts actions also run ping, DNS, port, certificate, traceroute and clock checks. Widgets show the values you choose or ping a host, and Control Center controls show your connection at a glance.
PRIVATE BY DESIGN
No account, no ads, no tracking, no analytics. Everything runs on your device, and requests to the internet start only when you allow or start them. Pingscape is free and open source: github.com/pilotofpackets/pingscape
Notes: iOS only lets an app read the Wi-Fi name with location permission. Your location is never used or stored. Finding devices on your local network needs the Local Network permission.
Show more
+1
What's New in Pingscape
1.1.0
November 13, 2026
New tools, and Siri can now tell you every network value. • Ping: set the packet size, don't fragment, and search the path MTU • DNS: DNS over TLS and HTTPS, DNSSEC, and several servers compared at once • Traceroute: a continuous mode (MTR) with loss and latency per hop • New tools: NAT (your public address and port via STUN), NTP (how far your clock is off) and dual stack (IPv4 against IPv6) • HTTP timing shows redirects and response headers • Siri and Shortcuts read every value, from the IP address to the Wi-Fi name, and run the tools • New widgets for any value and for ping, and Control Center controls • Better layout at large text sizes, more contrast and many small fixes
More





