
Pipewright Offset Calculator
Pipefitter Take-Out. Pay Once
0 ratings
Free
In-App Purchases
Rating summary
About
Offsets, take-outs and cut lengths for pipefitters, steamfitters and welders, on your iPhone.
Type lengths the way you read a tape: 1 Feet 4 Inch 3/16. Results come back in feet, inches and sixteenths, and every answer shows how it was figured: the formula with your numbers and the table it came from.
FREE FOREVER
• Simple offsets: travel, run and set from any two, at 11-1/4°, 22-1/2°, 30°, 45°, 60°, 72° or any angle
• Rolling offsets: true offset, travel, run and roll angle, with a diagram
• Grade and slope: inches per foot, percent, degrees and fall over a run
• Steel pipe data: Sch 40 and 80, 1/2" to 12": OD, wall and ID
• Feet-inch-fraction calculator with memory and a tape of every result
PIPEWRIGHT PRO — ONE PAYMENT, NO SUBSCRIPTION
• Cut length: center to center minus take-outs and welder's gap, each end set separately: butt-weld elbows, tees and caps, threaded with make-up, socket weld or your own take-out
• Offset cut: simple or rolling offset straight to cut length
• Elbow take-out at any angle, long radius, short radius or 3D, with center, inside and outside arc lengths
• Parallel offsets: equal spread around a corner
• Miter cuts: cut angle, cut-back and 16-point ordinates with a wrap-around template
• Saddles: branch trim ordinates and template for 90° branches, equal or reducing
• Full steel pipe data, 1/8" to 48", every schedule, with weight per foot and water fill
• Copper K, L and M, PVC 40 and 80, butt-weld fitting dimensions and NPT thread engagement
• Flange bolt-up, class 150 to 2500: OD, bolt circle, bolt holes, bolt count and stud size
• Tank volume, vertical or horizontal, partly filled
Every Pro function opens with a worked example, so you see exactly what you get before you pay.
Answers are tested against 474 formula cases and the worked examples in published pipe trades calculator guides. Table values come from public listings that agree with each other; always check against your spec or shop standard.
Works with no signal. No account. No tracking. No ads.
Show more
What's New in Pipewright Offset Calculator
1.0
November 10, 2026
1
Subscriptions & In-App Purchases
$12.99
Pipewright Pro: Unlock Once
Unlock every Pipewright function. One-time purchase.





