
PLC Go
LITEPUTER Lighting Control
0 ratings
Free
Rating summary
About
PLC Go is the setup and control app for Lite-Puter lighting systems. It is built for installers, system integrators and facility staff who need to commission dimmers and operate lighting on site.
CONNECTIONS
• ORBIT PLC dimmers through a PL-MXE101 gateway — connect directly over your local network, or remotely over the internet when you are away from the site.
• Bluetooth — connect to LITEPUTER-ART and DP-NEX3 controllers, or to a PL-XX-BL Bluetooth gateway.
WHAT YOU CAN DO
• Find devices automatically. The app scans for Bluetooth controllers and network gateways at the same time and lists everything it finds.
• Control up to 96 circuits from one console, individually or in groups.
• Save and recall scenes.
• Set up schedules and timers stored on the gateway.
• Configure wall panel keys (PL-CP204) — assign zones, scenes and key behaviour.
• Configure occupancy and daylight sensors (PL-DPS1, PL-PIR02).
• Review every circuit at a glance with live levels and current readings, and set overcurrent protection limits.
• Adjust dimming mode and fade time per circuit.
REQUIREMENTS
PLC Go works with Lite-Puter hardware and has no function without it. Network features require the app and the gateway to be reachable on the same network, or a working internet connection for remote access.
ABOUT PERMISSIONS
PLC Go asks for Bluetooth access to find nearby Lite-Puter controllers, and for local network access to find gateways on your Wi-Fi. It does not use your location.
Show more
What's New in PLC Go
1.5.0
November 3, 2026



