pult·energy

pult·energy

Power, battery, home heating

0 ratings
Free

Rating summary

Details

Released
October 31, 2026
Updated
November 16, 2026

Features

pult·energy screenshot #1 for iPhone
pult·energy screenshot #2 for iPhone
pult·energy screenshot #3 for iPhone
pult·energy screenshot #4 for iPhone
pult·energy screenshot #5 for iPhone
pult·energy screenshot #6 for iPhone
pult·energy screenshot #7 for iPhone
pult·energy screenshot #8 for iPhone
pult·energy screenshot #9 for iPhone
pult·energy screenshot #10 for iPhone
iphone
ipad
watch
🖼️Get Icon
Icons↘︎

About

pult·energy puts the power and heat at home under control. What's going on with the grid and the battery, how long it lasts, when the schedule says the power is due back - and the inverter, devices and room temperatures you run from your phone, watch or Mac. Got a hybrid inverter with a battery? pult·energy lets you see your home and set it up from anywhere. YOUR HOME ON ONE SCREEN • Is the power on, the charge in % and in kWh above the discharge floor, how much the home draws • «Lasts ~17 h» - from your home's usual consumption in the hours ahead • During an outage - a timer, the scheduled switch-on time and whether the charge lasts until then THE SCHEDULE - WHAT'S AHEAD AND WHAT HAPPENED • The charge since midnight and a forecast to the end of the day; how far and by when the battery will charge - and why • Outages now, next by schedule and already over • Schedule against the fact: «power beyond plan», «no power beyond plan» - by day, week and month INVERTER AND BATTERIES - FROM THE APP • The emergency reserve, charge speed, charging from the grid and a generator, where solar goes first - each explained • Before a risky change - what can go wrong and a second «yes» • Sets of settings for weekdays, weekends, winter and summer; any change can be rolled back • Inverter faults in words, not codes AUTOMATION - EACH ONE IS A SINGLE SWITCH • Charge to 100% before an outage, a morning reserve, devices back one by one • Night charging on the cheaper rate, expensive hours on the battery • Gentle charge, main breaker protection, surplus solar to the boiler DEVICES - ON THEIR OWN AND WITH ONE TAP • Shelly, Tuya / Smart Life, TP-Link Tapo sockets and relays - over your home network • Power goes - the boiler and floor heating switch off within 10 seconds; the washer isn't stopped mid-wash • Rules in sentences: by time, sun, charge, temperature and power state. «Explain» tells you what will happen, the log - why a rule didn't run • Timer, cycle, pulse, a daily run-time limit, running on the battery down to the charge you set • A meter for every device: how much it took and from where - grid, battery, solar ROOMS AND HEATING • Tuya / Smart Life thermostats by room: the temperature, the target and what the room is doing • A temperature schedule for weekdays and weekends • Smart start heats ahead, and learning measures how fast your room warms up • Scenes: «Night», «Away», «Home» - devices and rooms together YOU KNOW FIRST • Power gone and back, low charge, «Schedule updated», 30 minutes before an outage • A silent hourly report during an outage • Live Activity, Dynamic Island, widgets with buttons for devices, scenes and thermostats • Apple Watch: the app, complications, Smart Stack • Telegram for the whole family - everyone joins with their own code STATISTICS AND COSTS • Charts for the day you pick, from a minute to a week • The energy balance and the bill on one, two or three tariff zones • Export to Excel FOR THE WHOLE FAMILY, ON EVERY SCREEN • People and roles, timed access - 2 hours, a day or a week • Several homes in one account • On Mac - all of it on a big screen, home status in the menu bar • The pult.energy dashboard - in any browser WHICH DEVICES FIT • Find the model, get the steps or ask the assistant • "Add a device" in three steps: Shelly relays, Tapo and Tuya plugs • Zigbee temperature and humidity sensors: tap "+ Sensor" PRIVACY • Inverter data over a cable, no manufacturer cloud • The phone-to-home link is encrypted • No ports to open on your router • No ads, no third-party analytics WHAT YOU NEED • A Deye hybrid inverter with a battery • pult·controller next to the inverter, an RS485 cable • A pult account - email, Apple or Google • The outage schedule - Yasno (DTEK) The app is free. Everything is free for the first 30 days after connecting a home. No equipment yet? Open the demo: the app shows a real apartment. pult·energy is a pult product. Support: pult.energy/support
Show more
+2

What's New in pult·energy

1.7

November 16, 2026

Temperature and humidity sensors in every room - and new devices you add right from the app. ZIGBEE SENSORS - "+ Sensor": pult·controller searches for 2 minutes, you hold the button on the sensor - and it's in your home - Zigbee temperature and humidity sensors (Sonoff, Aqara and others) - A sensor tile in Controls: temperature to a tenth, humidity and battery; a warning when the battery runs low - The sensor screen: temperature and humidity charts for a day, a week and a month, the day's low and high - Assign a sensor to a room - the room chart, smart start and learning then go by it, not by the radiator thermostats - You need a Zigbee USB receiver in pult·controller (Sonoff ZBDongle-E) - pult·controller sets up the rest ADD A DEVICE - FROM THE APP - "Add a device" in three steps: search, setup, done - Shelly relays - over Wi-Fi and Bluetooth - TP-Link Tapo plugs: sign in to Tapo once per home - Tuya plugs: the key from Smart Life or entered by hand - Device not on the list - enter its IP address - The Tapo password and the Tuya key travel to pult·controller end-to-end encrypted WEATHER - Wind gusts in the forecast ROOMS - Climate explains why heating starts at exactly that time

More

Developer apps