Kết nối wifi với iphone bị văng
Kết nối wifi với iphone không nhập được tên wifi. Sau đó bị văng
Schrott
Keine Verbindung möglich. Das Gerät mit WLAN-Funktion zur verkaufen ist Betrug.
Fails to connect
Since it doesn’t connect, it is useless.
It remains in “wait for the device to show server IP”. My phone is on the 2.4 network, and I entered my router pwd, but I’t doesn’t move forward.
HELP
It remains in “wait for the device to show server IP”. My phone is on the 2.4 network, and I entered my router pwd, but I’t doesn’t move forward.
HELP
Wifi funktioniert nur bedingt
Wie so viele andere hier hatte auch ich das gleiche Problem, nämlich die Wifi-Verbindung wollte nicht funktionieren. Alle möglichen Einstellungen im Router ausprobiert, aber es blieb dabei, keinerlei Verbindung ließ sich herstellen. Nachdem ich dann so gut wie aufgegeben hatte, kam mir noch eine letzte Idee, einfach mal nicht das aktuelle iPhone sondern ein altes iPhone 5 auszuprobieren, und siehe da die Wifi Verbindung klappte sofort auf Anhieb.
Show more
Wifi verbinden funktioniert gar nicht!!!
Leider ist das RD6024 mit Wifi nicht nutzbar. Es kann keine Verbindung hergestellt werden! Schade!
Vielleicht mal die Verbindungsdaten im Gerät einstellbar machen, wie fast jeder andere Hersteller das auch macht!
Vielleicht mal die Verbindungsdaten im Gerät einstellbar machen, wie fast jeder andere Hersteller das auch macht!
Funktioniert nicht
Keine Verbindung möglich, Server-IP wird nicht angezeigt. Nutzlose Hilfedialoge.
Ein Stern ist noch zu viel
Trotzt stundenlangem Einstellen von Router und iPhone, ausschalten jeglicher Sicherheitsmechanismen.. Keine Chance auf eine Verbindung. Der allerletzte Schrott! Wie kann man sowas auf den Markt bringen? Falls es irgendwie mit einem Trick geht, bitte ich um eine Anleitung. Keinerlei Hilfe in der App oder im Netz. Unfassbar.
Show more
Es kommt keine Verbindung zu Stande!
Diese Software ist der letzte Dreck. Es kommt keine Verbindung zu Stande. Dafür will die Software aber den Standort freigegeben bekommen… nur um dafür zu sorgen, dass teilweise die Anweisung mit chinesischen Schriftzeichen belegt sind.
на яблоко все через попу
не подключается на macbook нет приложения кошмар
Keine Verbindung
Das Herstellen einer Verbindung gestaltet sich als äußerst schwierig, wenn sie denn überhaupt zustande kommt….
Исправить ошибку!
Дорогой китайский друг!
Приложение вылетает при попытке ввести логин пароль от сети Wi-Fi
Приложение вылетает при попытке ввести логин пароль от сети Wi-Fi
Absolut unbrauchbar
Keinerlei Funktion, nicht übersetzt/keine Labels - wie hat diese App die Apple Freigabe erhalten??????
Und wenn sie nicht abstürzt gibt es trotzdem keine Verbindung
Mit aktueller IOS stürzt die App bereits ab, bevor ich groß was einstellen kann. Mit älterem IOS kann ich das Netzteil suchen, habe dort die IP-Adresse meines Mobiltelefons, aber eine Verbindung kommt nicht zustande.
Server is 0.0.0.0?
Will not connect. Keeps thinking my iPhones WiFi network IP address is 0.0.0.0. I disabled cell phone access. Same problem. Tried resetting power supply a few times. Also closed program to open it again. It registers with WiFi but unable to connect to 0.0.0.0
Wifi pairing
Not working... no wifi Connection to Device
Don’t work
Not able to find any wifi network which my iPhone 11 Pro Max is connected too - field just empty. With an iPhone 5 S network can be selected and RD6018 show the IP but than the process stops with an error.
Does not work
So far trying to set it up in the “Distribution network” tab just instantly crashes the app
WLAN Verbindung ist nicht einstellbar!
Leider kann ich keine Verbindung aufbauen! Ich kann nur das Kennwort für mein WLAN eintragen sonst nichts! Bitte fixt das Problem
LG
Gerry
LG
Gerry
Cannot initialize the IP distribution
I’ve entered the WiFi password but everything else is greyed out.
WiFi works now!
Previously I had spent some hours over numerous days trying to get this App working with my iPhone 8 with no luck.
It seems it couldn’t identify the server IP address properly, thinks it’s 0.0.0.0 so failed at the Distribution stage.
There was some communication occurring between the RD6006 and my iPhone so I know it’s not a hardware issue. I have checked my modem for the mentioned compatibility settings, but nothing matches the name descriptions.
It’s a shame because the PSU seems to be quite good so far. The website doesn’t have an English option so no help there, and the YouTube videos have the comments disabled...
Hopefully someone will see this and solve the problem => see update below...
Edit V1.1.5: still doesn’t identify the modem/router IP. It still shows 0.0.0.0 it might be good to allow the user to set the server IP manually?
I did manage to get a false success message, but it didn’t connect to the GUI. Please keep trying!
Edit V1.17: It works! Thanks for your efforts. Note there is still room for improvement:-
1/ the voltage graph doesn’t show the actual voltage at all times => Found out the graph is interactive and was stuck at the start! Swiping left got it going again.
2/ the address set in the control centre doesn’t seem to affect the Server Address (my iPhone IP), nor the device IP which is shown in my Network Analyzer App. What does it do? Same for the Address in the RD6006 menu. Should these be set the same? A better instruction would be good.
3/ the set values M1 - M9 can be controlled via the callout icon, but the On/Off output behaviour is different when setting a higher/lower value. It would be good to have a consistent behaviour.
4/ solving the above 2 items would add another ⭐️
It seems it couldn’t identify the server IP address properly, thinks it’s 0.0.0.0 so failed at the Distribution stage.
There was some communication occurring between the RD6006 and my iPhone so I know it’s not a hardware issue. I have checked my modem for the mentioned compatibility settings, but nothing matches the name descriptions.
It’s a shame because the PSU seems to be quite good so far. The website doesn’t have an English option so no help there, and the YouTube videos have the comments disabled...
Hopefully someone will see this and solve the problem => see update below...
Edit V1.1.5: still doesn’t identify the modem/router IP. It still shows 0.0.0.0 it might be good to allow the user to set the server IP manually?
I did manage to get a false success message, but it didn’t connect to the GUI. Please keep trying!
Edit V1.17: It works! Thanks for your efforts. Note there is still room for improvement:-
1/ the voltage graph doesn’t show the actual voltage at all times => Found out the graph is interactive and was stuck at the start! Swiping left got it going again.
2/ the address set in the control centre doesn’t seem to affect the Server Address (my iPhone IP), nor the device IP which is shown in my Network Analyzer App. What does it do? Same for the Address in the RD6006 menu. Should these be set the same? A better instruction would be good.
3/ the set values M1 - M9 can be controlled via the callout icon, but the On/Off output behaviour is different when setting a higher/lower value. It would be good to have a consistent behaviour.
4/ solving the above 2 items would add another ⭐️
Show more
