RecSho - X32, X-Air, Wing

SAVE AN HOUR OF BUSYWORK PER SHOW RecSho records every channel of your mixing console to its own WAV file, named from the console's scribble strips. Set it up once at soundcheck. After that it's ready when the band is, and records when you want it to. No more re-routing, renaming, re-downloading, or re-much of anything. No interleaved wav files to unpack. It just works. PLUG IN, SET UP ONCE Connect the console over USB and put it on the same network. Setup asks one question at a time: the audio device, the console, the show name, where to save, a signal check and auto-arm. Meters are live before anything records, so you can watch every input arrive. RECORDS WHEN YOU WANT IT TO Press Record, or let auto-arm start the take: by sound, when any channel rises above the threshold you set, or by the console, when a main or DCA you pick is unmuted. An auto-armed take keeps the seconds before it started, so the count-in is on the recording. It stops after the quiet time you choose, or 5 seconds after the console mutes. Stop sits behind a flip-up guard. ONE FILE PER CHANNEL, NAMED FROM THE CONSOLE Every channel becomes a 24-bit WAV such as "01 Kick In.wav", not "Ch 01.wav", plus a stereo rough mix for a quick listen. If someone renames a strip during the show, the files take the new name when the take ends. CHECKS THE ROUTING RecSho reads the console's routing and shows, channel by channel, what is being recorded and what isn't. A difference is a plain-language warning, never a block: the take keeps recording, and RecSho never changes your routing. Until its reading is confirmed on your console model, it says so. FAILSAFES INCLUDED Takes are saved every 5 seconds as they record. If the app quits or the power goes, the files play up to the last save, and a take cut short is finished the next time RecSho opens. A lost input, a silent channel or a low disk is named in one line, with the one thing to do about it. TAKE LOG Every take with its length, track count and copy state. On a Mac, finished takes are copied to the drive or network share you choose and checked by SHA-256 before each file gets its final name. Silent channels can be left out, and a take zips into one file for the band. ON IPHONE AND IPAD The same recorder in your pocket: the same Setup, Record and Take log, with recordings kept on the device until you export them to Files. Use a USB hub to charge and record simultaneously without a computer. ALSO - Optional SD card backup (off by default; new, and marked as untested in the app): starts and stops the console's own card recorder with each take (X32, M32 and WING), and asks before changing anything on the card. - Dante on a Mac, through Dante Virtual Soundcard (sold separately by Audinate). - Listen to the rough mix or a soloed channel on a Mac's speakers or headphones. - Notifications when a take is saved or something needs a look. - Recording time left at your track count. WORKS WITH Behringer X32, X32 Compact, X32 Producer and X32 Rack (X-USB or X-LIVE card) and Midas M32, M32R and M32C (DN32-USB or DN32-LIVE card): up to 32 channels. Behringer WING, WING Compact and WING Rack: up to 48 channels. Behringer XR18 and Midas MR18: 18 channels. Any other audio interface, or the built-in microphone, records one WAV per input. Channel names, colours, mute triggers, routing checks and SD card backup need the console on the same network; recording needs only the audio connection. NO ACCOUNT, NO TRACKING RecSho has no account, advertising or usage analytics. Your recordings stay on your devices and the drives you choose. Error reports to sho.run are off unless you turn them on. One purchase covers Mac, iPhone and iPad. Requires a Mac with Apple silicon. Behringer, Midas, X32, M32, WING, XR18, MR18, Audinate, and Dante Virtual Soundcard are trademarks of their owners; RecSho is not affiliated with or endorsed by them.