Cases
The total case count does not work for each caliber added to the cases section. Displays 0 Case(s) regardless of how many entries are added.
Needs a way to easily convert built rounds to fired brass
This app is handy for keeping track of expenses, and has some really well thought out features. I like e the recipe build and auto deduction from stock… but going the other way… it’s a bit cumbersome. It takes too many steps to subtract fired ammo and then add the brass back to your “brass” ingredients list. Seems like this could be automated with a simple dev session. A “fired” field for taking out of stock and quantity option that then adds the brass to a “fired brass” build ingredient that could then at a later time be “prepped brass” for reloading could be helpful.
Show more
Fantastic
Been using the app for a while and am really happy with it. Recently started developing recipes for a new bullet and having all my notes right in hand and the ability to print from the bench has saved me time and makes the whole process easier. Keep up the good work
Buggy
App just crashes when trying to print a label
Bye Bye notebooks....
Wish I had this 25 years ago when I began to reload. This app is simple to use, yet very powerful. I have 42 different types of powder on-hand. Keeping track of it in a spiral notebook is a hassle and inefficient. With this app the data is always at my fingertips instantly on my phone. The same applies to bullets, primers, cases, firearms, reloading sessions....and much more. I made a suggestion to the developer not only did he respond, he added the feature in a later update. Wow!
Show more
Must have for reloaders
I’ve been using this app for a few years now and it’s so helpful to have all my recipes and inventory in one place vs. multiple notebooks and spreadsheets. The one thing I’ll say is that I wish the picture sizes were bigger, they’re so small that you can’t see what it is to help with sorting.
App is good but needs improved
There are a lot of data points missing. Add a way for user to add data like bullet caliber and different manufacturers ect. Like I have a 44 mag which there is no listing for or magpull magazines. But this app has serious potential for reloaders.
Very nice
I really like this app! I’m not an ammo reloader, but this app still has all the features that I like for inventory, cost and ammo inventory. Love the pre loaded categories. Almost everything that I like. I would like to see a spot for gun maintenance and repair, as I document all maintenance that I do. I highly recommend this app to gun enthusiasts.
How about something similar to the rounds count section? That looks good and easy to use. And where you can have a viewable history to the maintenance and repair done. Date, maintenance, repairs, modifications. Some ideas like that.
How about something similar to the rounds count section? That looks good and easy to use. And where you can have a viewable history to the maintenance and repair done. Date, maintenance, repairs, modifications. Some ideas like that.
Show more
Very nice
I really like this app! I’m not an ammo reloader, but this app still has all the features that I like for inventory, cost and ammo inventory. Love the pre loaded categories. Almost everything that I like. I would like to see a spot for gun maintenance and repair, as I document all maintenance that I do. I highly recommend this app to gun enthusiasts.
Show more
Response from developer
Hello and thanks for the support! When you say gun maintenance and repair, how would you feel it should look? Like a tableview or a separate section? I can definitely add this if you can further clarify.
Looks awesome
Initially I did not find the components or calibers I run but you can add them using the … in the upper right corner. That makes this app perfect for keeping track of just about everything I have.
Was working great - until the latest updates
I had everything entered into this app. All my recipes and my inventory and things were great. One of the updates over the last month changed all that as I can no longer see my data in the app. There are placeholder entries but nothing is populated. This is very frustrating since I use this track everything and now I need to start over from scratch.
Show more
#1
Perfect to keep Tracks of all the component
Fantastic support
I had some questions about this app and contacted the developer for support. He was absolutely fantastic, replied quickly and was very patient in answering my questions. All developers should have this level of support. I highly recommend this app if this is your thing.
Awesome App!
I have been using this from the beginning. Let say I truly appreciate the constant improvements. Please keep up the good work. This is my go to app. Thank you!
Customer service
Customer service top notch
Bye Bye notebooks....
Wish I had this 25 years ago when I began to reload. This app is simple to use, yet very powerful. I have 42 different types of powder on-hand. Keeping track of it in a spiral notebook is a hassle and inefficient. With this app the data is always at my fingertips instantly on my phone. The same applies to bullets, primers, cases, firearms, reloading sessions....and much more. I made a suggestion to the developer 2 months ago and not only did he respond, he added the feature in a later update. Wow!
Show more
Waste of $4.99
This app is not what I thought it was, and I wish there was a way to get refunded. It was not helpful at all. If it had a 7 day free trial I would definitely not purchased it.
Excellent App for tracking Reloading
I rarely write reviews, but this app is so easy to use and so powerful, I had to give the creator credit for it. It makes it very easy to track your loads, equipment and inventory across multiple iOS devices. You can record your production on your iPad, then when you are at the store, check your phone to see what components need to be replenished. Also makes it easy to track both your store bought and reloaded ammo inventory, so you know when it’s time to reload. It does a great job at tracking your expenses and reloading cost. It has a very user friendly interface, and the author is responsive to suggestions and always making improvements. I couldn’t be happier with the ease of use and functionality.
Show more
A M A Z I N G !
This app deserves to cost way more than it does, excellent database development! After buying this app I was able to inventory my entire reloading setup within three hours, setup all the recipes I have been creating and then actually assemble an inventory of created cartridges. Whaaattt?!?
I am super impressed with the amount of detail allowed from pressures to Ballistic Coefficients and even local weather data during testing, which you may choose not to use. Finally, cost and inventory reduction analysis along with many types of reports that can be generated and the ability to sync data across devices. So much more is here than I can even comment on. This is truly a top notch app, very likely one of the best uses of my device to date.
Here is what I found as my wishes and regrets regarding the app:
The app crashes when a character not meant for that specific field is entered ex: in the “Test Data; Overall Score” field I tried to add a forward slash and the app crashed which was a little frustrating because I was in the middle of populating not only the “Test Data” fields but also the previous “Recipe” fields and when the app crashed, I lost everything I was entering for both pages. Whoops! Now I save entered data like I have Tourette’s syndrome.
I would like to be able to separate reloading component and equipment groups into different categories so I can generate different reports based on those categories, even if recipes have been built using a combination of category groups. Stick with me, I know this sound a little crazy. Here is an example: I am housing reloading components and equipment that have been added to my inventory by another person. I might use a component added by said person and a component added by me but I want to keep separate inventory totals and reports regardless such as overall cost reports for each person.
It is not intuitive to have just the “primer size” show when building a recipe since it doesn’t show the “type” when selecting from primer inventory. Example: I have more than one type of small rifle primer in stock and I filled out the “type” field for those components (BR-4 and 400, respectively) but unless I create a new “primer size” title that includes the type in it, I don’t know which primer I am selecting for a recipe when I fill in that field while building a recipe.
Thank you for such an amazing, useful application!
I am super impressed with the amount of detail allowed from pressures to Ballistic Coefficients and even local weather data during testing, which you may choose not to use. Finally, cost and inventory reduction analysis along with many types of reports that can be generated and the ability to sync data across devices. So much more is here than I can even comment on. This is truly a top notch app, very likely one of the best uses of my device to date.
Here is what I found as my wishes and regrets regarding the app:
The app crashes when a character not meant for that specific field is entered ex: in the “Test Data; Overall Score” field I tried to add a forward slash and the app crashed which was a little frustrating because I was in the middle of populating not only the “Test Data” fields but also the previous “Recipe” fields and when the app crashed, I lost everything I was entering for both pages. Whoops! Now I save entered data like I have Tourette’s syndrome.
I would like to be able to separate reloading component and equipment groups into different categories so I can generate different reports based on those categories, even if recipes have been built using a combination of category groups. Stick with me, I know this sound a little crazy. Here is an example: I am housing reloading components and equipment that have been added to my inventory by another person. I might use a component added by said person and a component added by me but I want to keep separate inventory totals and reports regardless such as overall cost reports for each person.
It is not intuitive to have just the “primer size” show when building a recipe since it doesn’t show the “type” when selecting from primer inventory. Example: I have more than one type of small rifle primer in stock and I filled out the “type” field for those components (BR-4 and 400, respectively) but unless I create a new “primer size” title that includes the type in it, I don’t know which primer I am selecting for a recipe when I fill in that field while building a recipe.
Thank you for such an amazing, useful application!
Show more
Worked great until IOS vs 14
This has been a perfect app for managing my inventory.... until I updated to the newest IOS. It’s now buggy and hangs up. Can’t open my primers at all, and when I try it hangs up my iPhone 8 and I have to restart it. All is still good on my iPads and I turned IOS updates OFF on both. I still give the app high marks, the trouble is obviously with the Apple phone update, but they’ll leave it up to the app developers to figure out the problem they created. Hey, it’s Apple. I have issues with at least 2 other apps so far.
Show more
