SelCall for Google Play
Please publish this for Google Play Top
LOW VOLUME!
I was so disappointed it could’ve been a good app but the volume was so low. I could barely hear it. I placed it right next to another phone to see if it would pick up the tones on all it gave was a 111 all the time, sorry but it’s a big fail
SELCAL APP
This app works just fine. There’s a bit of a learning curve to understand how it works, but it’s totally worth it. The default DTMF function is spot-on.
If you want to generate SECAL codes, ya gotta dig a little deeper into the program. But, IT DOES WORK!!!
If you want to generate SECAL codes, ya gotta dig a little deeper into the program. But, IT DOES WORK!!!
Aviation. Does not work
Tried several times. Doesnt work.
Interface not very good. It should have a dash.
Needs a lot of improvement
Interface not very good. It should have a dash.
Needs a lot of improvement
SELCAL APP
This app works just fine. There’s a bit of a learning curve to understand how it works, but it’s totally worth it. The default DTMF function is spot-on.
If you want to generate SECAL codes, ya gotta dig a little deeper into the program. But, IT DOES WORK!!!
If you want to generate SECAL codes, ya gotta dig a little deeper into the program. But, IT DOES WORK!!!
Does not work on aircraft
This app does not work for airplane selcal tests. There is an android version that works perfectly.
Useless doesn’t work
Simply does not work none of the features work you can’t store any code it’s useless
Doesn’t work
Don’t buy it.
It Does Work!
I’m also flying the A380 and the issue the other two reviewers must be having is they have not selected “Speaker” as the output.
To do this, tap the top right to enter the tone type generator menu then again tap top right to select “Speaker” instead of “iPhone” the volume will now be loud enough.
Lost a star from me because clearly the UI needs improvement to make it more intuitive.
To do this, tap the top right to enter the tone type generator menu then again tap top right to select “Speaker” instead of “iPhone” the volume will now be loud enough.
Lost a star from me because clearly the UI needs improvement to make it more intuitive.
Show more
Buggy
A bug in the system means you have to delete the app and download it again every time you want to use it. No longer supported by tech support.
Works but far too quiet
As I said above
Not all ICAO tones are correct
J & Q & PNeeds to be checked and corrected
Two-Tone Sequential
Awesome gap for Generating Quik-Call and Quik-Call II Paging tones, go to the selection menu and go to sequence, add numbers is this format
Quik Call (Ex. FAPA/KAGA)
Tone Pair 1. Timing
First Line: 489.8 1122.1 1000
Second Line: 0 200 - Intertone Gap
Thrd Line: 741.3 543.3. 1000
Quik Call II ( QCII Type Y FA/GA)
Freq.
Line 1 : 489.8 1000
Line 2: 543.3 3000
Quik Call (Ex. FAPA/KAGA)
Tone Pair 1. Timing
First Line: 489.8 1122.1 1000
Second Line: 0 200 - Intertone Gap
Thrd Line: 741.3 543.3. 1000
Quik Call II ( QCII Type Y FA/GA)
Freq.
Line 1 : 489.8 1000
Line 2: 543.3 3000
Show more
SelCall
Not enough volume so didn't work on real aircraft a380
Volume much too low. Please update.
The volume of the generated tones is super low!! Could you please increase the volume? Thank you.
Needs updating
Doesn’t work with current devices
Agree with technogeek8905
Needs 2 tone paging. QC/QC2, Plectron and GE 99.
Ok, but missing common formats
Needs 2-tone paging added. QC and QCII, plectron.
Speaker
Use to be able to enable the speaker on the phone app seems to be faulty now don’t bother with it.
32bit App wird auslaufen
Gerade gekauft und die erste Info beim starten der App: Sie ist in 32bit programmiert und wird unter iOS 11 nucht mehr funktionieren... Toll 😒
Response from developer
SelCall is a 64 bit app.
