
ShawTech
ShawTech Lighting
About
What's New in ShawTech
1.4.0
November 17, 2026
• *** Important: firmware 2.0 turns on color calibration, so the lights show the color you pick. Presets you made before may look darker or richer. Open any that look off and adjust the colors, or turn calibration off in Controller Settings. *** • Turning off sync now blanks all controllers. • The power button shows the controller switching and waits for it. • Setup starts on the light type your controller was loaded for, and asks you to check your lights before changing it. • Mesh Wi-Fi hop guard can be switched off per controller. Needs firmware 2.0.9. • The Lightning effect is off until you turn it on: Controller Settings, Config, Lightning Effect. • Sunrise and sunset schedules need your ZIP code. Setup now checks that the ZIP reached your controller, a controller with no ZIP says so, and saving a sunrise or sunset schedule without one asks first. • A schedule whose preset was deleted now says "Preset no longer exists", and deleting a preset that a schedule runs asks what the schedule should do. • Installers: hold the ShawTech logo for 5 seconds, then enter your 5-character installer code and your email to turn on installer mode. Each new setup asks whether it is for a customer or for yourself. Controllers you set up for a customer belong to the customer from the start, and My Controllers shows Install mode with the time left on your access. When the customer pairs their own phone, the controller leaves your phone at once and the app tells you who claimed it. • LED Engine: a new button at the top of Presets opens a page where you can ask ShawTech for a Story, a Pattern or a Custom Preset built for your lights (3 requests a month per household). Needs firmware 2.0. • Live view on the color wheel: see the exact color and brightness on your lights while you pick it. Needs firmware 2.0. • Calibrate colors: in Controller Settings, tune your strip's red, green and blue so whites and colors look right. Works on your home Wi-Fi. Needs firmware 2.0.4. • New in Controller Settings: "Color Chips on Control". Turn it off for a simpler Control screen with only your row of chosen colors. • Colors: you can add the same color, including Off, more than once in an effect. A color you dimmed earlier opens with its own brightness. Hold the soft white chip for 3 seconds to set its brightness. • Static Scenes: a color wheel chip at the end of the palette row. Pick any color and brightness for the brush; it is kept when you save the scene. • Settings that only work on your home Wi-Fi (support access, turning the cloud off, color calibration, resets, updates) now ask you to join your home Wi-Fi first, and on iPhone they tell you when Local Network access is turned off. • Schedules say "12:00 AM (Midnight)" and "12:00 PM (Noon)", so a midnight schedule can't be saved as noon by mistake. • Newer controllers: the power ring follows the controller's real power state, Controller Data shows live power rows, and a red banner warns if LED power has a fault. Fix Wi-Fi shows the pairing button instead of the unplug-three-times routine. • RGBW controllers: White Warmth has a Brightness slider, so a white can be added dimmer. • My Controllers now also shows controllers your account owns that this phone never set up. • Send Logs to ShawTech is in the menu on every setup screen, so a stuck setup can send us its log on the spot. • The effects list opens at the effect you are using. • Android: if the phone's Android System WebView is too old, the app says so and links to the Play Store update. • The app uses less battery in the background.
More



