sizeless SiteScan

What's new since version 5.3.0: - Markers are placed with a crosshair: a crosshair sits in the middle of the camera view. Aim it at the spot and tap Mark, and a numbered marker is placed exactly there. A short vibration, a sound and a ring confirm it. Tapping the camera image no longer places a marker. - Every marker can get a category: after each marker, Building entry, Reference point and Damage are offered for 10 seconds, and the number takes the category's colour. A marker left without a category is blue. - Undo names the marker it removes, for example Delete #3, and removes only that one. - Stopping takes a deliberate hold: press and hold the stop button for one second. A ring fills, and the recording ends with a sound. A short tap only shows Hold to stop, so a recording can't end by accident. - Sounds and vibration: starting, stopping and marking each have their own sound and vibration. The sounds follow the silent switch. Both can be turned off in Settings, under Sounds while recording and Haptics while recording. - Voice notes are chosen before each recording: With sound or Without sound, again for each further part. With sound, you can talk at any time while scanning, and a level meter above the timer shows that the microphone is recording. - The 3D preview shows markers as dots in their category colour. In full screen, tap a dot to see its number and category, for example Marker #3 Damage. - Further parts of a recording are now called parts, for example Recording 1 (part 2). A new tip, In One Go, recommends recording the whole site at once where possible.