SkyTimer: Log Flights & Fuel

SkyTimer 3.0 is a whole new SkyTimer, redesigned around the information you need in flight, readable at a glance on iPhone, iPad and Apple Watch. • A redesigned flight screen. Your aircraft's fuel system is drawn as it really is, with every tank, selector and pump and live quantities. Endurance, fuel flow, range and Zulu time stay in view, and the status bar counts down to your next tank switch. Prefer the old look? Choose Classic in Settings › Display. • Nearest airport, always in view. The closest suitable field with its direction, distance, longest runway, frequency and pattern altitude, plus a nearby list and Direct To. Set the minimum runway for each aircraft. • A new Preflight. Your departure is picked from the map, you set the fuel in each tank on the aircraft drawing, and enter Hobbs and tach before you start. • Track Hobbs and tach together. Log one or both, at preflight and at the end of each trip. • Fuel Timeline. Saved trips show the fuel in each tank across the whole flight, with every tank switch, stop and refuel. • Easier aircraft setup. Pick your type from over 150 common GA aircraft and its tanks, capacities and typical fuel burn fill in, including twins and Bonanza tip tanks. Set up fuel management plans with tank-switch and pump reminders, and add extra fuel burns such as rich or lean of peak. • Try it on the ground. A guided test flight, about three minutes from Oshkosh to Green Bay, walks you through the new design in your own aircraft. Test Fly any aircraft from the Aircraft tab. • Redesigned for Apple Watch. The new flight screen is on your wrist. Turn the Digital Crown for nearest airports, what's next, fuel and route. • Made for iPhone Duo, with layouts for the cover screen and the open display. • Plus: an updated airport database, sending to LogTen and FlightLoop with a message if a send can't go through, Manage Subscription in Settings, and many fixes. Your aircraft, flights and reminders carry over. SkyTimer 3.0 requires iOS 17 and watchOS 10 or later.