Can you fix the vibration issue?
Response from developer
In the current version, to avoid false detections, a second (haptic) feedback will not occur unless the detected magnetic field drops below a certain threshold value. If a second notification does not occur, it can be inferred that, under the current specification, the Apple Watch is continuing to detect magnetic data that does not actually exist. For this reason, triggering feedback continuously whenever the value exceeds the threshold would be expected to result in a significantly higher rate of false activations, which is why the current specification has been adopted. If detection only occurs once, please consider the following possibilities: 1. You have not moved sufficiently away from the magnet. The threshold for "sufficiently away" is positioned slightly on the magnet side of the midpoint between the location where the device was turned on and the point where the first feedback was triggered. 2. The device's magnetic data has not been refreshed. Please refer to the values displayed on the settings screen. If there is an issue with the data not updating, lightly moving the device (rolling it slightly back and forth) will trigger a data refresh. 3. The device itself has become magnetized. In this case, turning it off and back on will reset the initial value and allow it to function properly. If detection does not occur again even after moving beyond the threshold point, please consider that the device may have become magnetized or that there is an issue with the magnetic data update. Finally, if you would like to toggle the feature on and off each time, we recommend looking into the Motion Mode specification.
Can you fix the percentage issue?
Response from developer
Thank you for your feedback. This should be resolved in version 4.1 — please update and let us know if the issue persists.
Can’t use uploaded to ultra 3
Response from developer
This has been fixed in version 4.1, which was built for watchOS 26 and fully supports Ultra 3. Please update and let us know if you run into any issues!
Great for which hand
Superb ♥️♥️♥️
Lots of adjustments
Don’t forget about the stealth mode (stealth clock display while in use. Check instructions for using this feature).
Highly recommended by me - Charlie Dent.
