Decent app but…
Like a lot of others have pointed out the app does not retain the BT device. The app is decent, straightforward, easy to use, and does what I expected for the most part. If it retained the connected device I would have given 5 stars!
BT Memory
It’s a decent app. Not much available in the way of instructions, making it a little challenging if you’re new to solar, but it’s straight forward enough and easy to figure out.
My one improvement request is that the app would retain the BT unit selection when you open it. It’s cumbersome to have to scroll through every BT device with a radio to locate the unit and connect to it.
Seems like this should be a simple fix that would shore things up a lot!
My one improvement request is that the app would retain the BT unit selection when you open it. It’s cumbersome to have to scroll through every BT device with a radio to locate the unit and connect to it.
Seems like this should be a simple fix that would shore things up a lot!
Show more
Not showing load
Everything works except load
No load and disconnects constantly
4 years and LOAD still doesn’t work.
Disconnects often
The app doesn’t stay connected to the charge controller. It’s exactly what I need when it works, but it’s frustrating to have to manually reconnect it 7-8 times in a row.
Increase LVD limit to 12.4
Had trouble starting the car the other week because the accessory cut off was set to the recommended 11.2v which was too low for my rav4 4 cylinder.
Won’t register any data
I can successfully connect via Bluetooth (even though you have NO IDEA what the Bluetooth name is). After 30 minutes of waiting the app still won’t show any data for the battery or MPPT controller. I have tried many times. I can’t seem to be able to contact the developer either.
Bluetooth issues and no Load
Read the order reviews. Same thing for me. Please fix these two issues and it’ll be a great app.
Generell gute App
Kritikpunkt: Für die Last wird für den Tages- bzw. Gesamtverbrauch kein Wert (0 kWh) angezeigt. Weiterhin sind manche Übersetzungen nicht optimal, sonst ist die App aber gut.
Works
Generally works and reports what it gets from the controller. I wish it would remember what I connected to last and automatically reconnect and show the status page instead of the connect page.
There are a couple of things but it might be the fault of the controller. The app reports an inaccurate battery percentage and charge status. Says 99% but battery is at 13.4V. Also reports always in chargefloat mode even if I change the thresholds. I see current going into the battery so I’m probably good for my application (automotive AGM top off charger).
There are a couple of things but it might be the fault of the controller. The app reports an inaccurate battery percentage and charge status. Says 99% but battery is at 13.4V. Also reports always in chargefloat mode even if I change the thresholds. I see current going into the battery so I’m probably good for my application (automotive AGM top off charger).
Show more
No load
As the other reviewers stated the Bluetooth doesn’t stay connected (small inconvenience). The larger issue is it isn’t monitoring the load on the battery bank. If this was fixed in a update I would give it four stars.
Sehr funktional
Pro:
Eine einfache und deshalb gute App.
Mehr braucht man nicht. Alle wichtigen Informationen sind vorhanden.
Contra:
Zu Beginn wird eine Bluetooth Geräteliste angezeigt. Leider sind dort nicht nur Laderegler sondern auch alle anderen Bluetooth Geräte aufgelistet. Manchmal tippt man dann daneben und die App versucht z.B. das TV zu verbinden, was natürlich Unsinn ist. Das ist etwas unkomfortabel.
Manchmal ist nicht ganz klar was gemeint ist. Die TOT Funktion zur Steuerung des Verbrauchers funktioniert entweder gar nicht oder nicht gut erklärt. Es gibt aber andere Einstellungen die funktionieren.
Fazit:
Gute App mit Potential für Updates
Eine einfache und deshalb gute App.
Mehr braucht man nicht. Alle wichtigen Informationen sind vorhanden.
Contra:
Zu Beginn wird eine Bluetooth Geräteliste angezeigt. Leider sind dort nicht nur Laderegler sondern auch alle anderen Bluetooth Geräte aufgelistet. Manchmal tippt man dann daneben und die App versucht z.B. das TV zu verbinden, was natürlich Unsinn ist. Das ist etwas unkomfortabel.
Manchmal ist nicht ganz klar was gemeint ist. Die TOT Funktion zur Steuerung des Verbrauchers funktioniert entweder gar nicht oder nicht gut erklärt. Es gibt aber andere Einstellungen die funktionieren.
Fazit:
Gute App mit Potential für Updates
Show more
App settings
Dear developer, your app is quite handy. I have a question about this: Is it possible to get a user manual from you? I am particularly interested in the timing of the load output. I want to run the load output from sunset to sunrise. Which setting do I have to use for this? (24; day/day; death; manual?) Kind regards, Giorgio from Saxony.
親愛的開發人員，您的應用非常方便。 我對此有一個問題：是否可以從您那裡獲得用戶手冊？ 我對負載輸出的時序特別感興趣。 我想從日落到日出運行負載輸出。 我必須為此使用哪個設置？ （24；一天/一天；死亡；手動？）親切的問候，來自薩克森的喬治。
親愛的開發人員，您的應用非常方便。 我對此有一個問題：是否可以從您那裡獲得用戶手冊？ 我對負載輸出的時序特別感興趣。 我想從日落到日出運行負載輸出。 我必須為此使用哪個設置？ （24；一天/一天；死亡；手動？）親切的問候，來自薩克森的喬治。
Show more
For now the 5 stands
The LOAD screen parameters remain at zero even when a 6A load (light bar) is on and running….the app has run flawlessly on PV and BATT…easy setup etc…except for load side
Decent, but needs a bit of work
Decent app. 3 stars because it constantly disconnects. I can reconnect it easily but it’s still annoying. If the app would at least attempt to reconnect automatically, I’d give it 5 stars. A few seconds of not showing values while reconnecting is better than having it fully disconnect and require me to reconnect manually.
Show more
Simple App ohne Schnick Schnack
Bluetooth steigt schnell aus, entweder ist die Reichweite nicht so toll oder es liegt an der App.
Aber ansonsten tolle App.
Aber ansonsten tolle App.
Gut, aber ...
... Bluetooth nicht stabil, App hängt sich zum Teil auf.
Wenn Verbindung steht, sind die Daten korrekt.
Wenn Verbindung steht, sind die Daten korrekt.
