Information provided by app is ok
The problem is the refresh rate is extremely slow. Before I upgraded to the WiFi version, I had near realtime data. It’s taking approximately 4mins to refresh. Not good enough
Room for improvement
Graphics should be more intuitive if the are two circuits should show both power consumptions nos just L1, should have the option to keep it logged in and not having to login every time you open the app, should add notifications base on consumptions, battery levels, temp and power usage. Please improve graphs
Show more
Not correct information!
The information about charge levels and power source are not correct
Warning!!!
It’s not working on the last version of ios!!
App
App not working properly
Muhammad
Connects hardly and after connection sometime disappears and sometime works fine,needs improvement,no contact details to the developer to complain to,needs fixing
Good job
Excellent app and shows detailed information
Solar app with big issues
It has pros and cons, unfortunately more cons.
Pros
Lost of statistics in text, data from grid, PV and battery as well as consumption.
Quick view of how the system is working.
Cons
No notifications, if there is an apañen or failures there is nothing
Current flow diagram is inaccurate and doesn’t show real wattage usage if there are more the one output lines. Only L1 will show up on diagram
You need to log in every time you want to use the app and there is no Face ID
Statistics could be much more app friendly and they are showed via text, could be just a house click to see statistics..
Pros
Lost of statistics in text, data from grid, PV and battery as well as consumption.
Quick view of how the system is working.
Cons
No notifications, if there is an apañen or failures there is nothing
Current flow diagram is inaccurate and doesn’t show real wattage usage if there are more the one output lines. Only L1 will show up on diagram
You need to log in every time you want to use the app and there is no Face ID
Statistics could be much more app friendly and they are showed via text, could be just a house click to see statistics..
Show more
devices not showing
i added the devices but it dose not show it and cannont be removed
Lacks 240v Support in Readout
Great software for a 120v system but lacks accurate readings for a 240v split phase system. Please update to give accurate readings for SunGold Power TP-6048 unit.
Not very smart
Very very limited app. It does not have push notifications, you have to go manually to the alerts section to know if there is a grid power outage. The animated graph only gives you the phase line that has the most watts used, it doesn’t total the household wattage consumption (both lines). You have to go to the bottom of the history to see the total wattage. The app gives you the total of yearly, monthly and daily PV production, but not the household consumption. Not much time and effort developing this app.
Show more
Everything was working at least ok until the last update, now I cannot modify any settings
Everything was working at least ok until the last update, now I cannot modify any settings
problem
app. is not real time you have to wait 5 minutes for update of app...
Do better
Typical trash Chinese app.
Awful
Extremely poor quality. Buggy, unreliable and full of nonsense numbers. Poor translations and you couldn’t set up your device using this - it doesn’t seem to save anything. Slow and clunky and difficult to use.
The numbers in it are extremely unreliable. Sometimes maybe it hasn’t updated, which is definitely an issue - but other times they’re clearly just nonsense. For example, - “Overview” section claiming “today generation 4.0kwh” at 10am when my panels are still shaded by trees. I also don’t have that many panels yet. It’s looks like a fake demo number they didn’t wire up.
Elsewhere it provide a plausible figures, sometimes, but the lack of updating and general unreliability mean you can’t really use it to keep tabs on your solar set-up.
It provides some weird graph that seems to show Alarm %, based on the key. It makes no sense. No real production data shows up here.
The app logs out frequently. Every time you close the screen and come back to it, but sometimes also while you’re using it?! It’s very silly.
My inverter device gets duplicated sometimes (a second version of it appears in the list).
When trying to look at parameters it’s very slow to load settings, the buttons are badly named translations, and then it doesn’t appear to save any changes anyway.
If you’re shopping for an inverter and they use this app, I’d avoid it personally. The PC software is equally terrible (as was the manual with our device). If you want truly remote monitoring or any real control or access to your own data, this can not provide it.
The numbers in it are extremely unreliable. Sometimes maybe it hasn’t updated, which is definitely an issue - but other times they’re clearly just nonsense. For example, - “Overview” section claiming “today generation 4.0kwh” at 10am when my panels are still shaded by trees. I also don’t have that many panels yet. It’s looks like a fake demo number they didn’t wire up.
Elsewhere it provide a plausible figures, sometimes, but the lack of updating and general unreliability mean you can’t really use it to keep tabs on your solar set-up.
It provides some weird graph that seems to show Alarm %, based on the key. It makes no sense. No real production data shows up here.
The app logs out frequently. Every time you close the screen and come back to it, but sometimes also while you’re using it?! It’s very silly.
My inverter device gets duplicated sometimes (a second version of it appears in the list).
When trying to look at parameters it’s very slow to load settings, the buttons are badly named translations, and then it doesn’t appear to save any changes anyway.
If you’re shopping for an inverter and they use this app, I’d avoid it personally. The PC software is equally terrible (as was the manual with our device). If you want truly remote monitoring or any real control or access to your own data, this can not provide it.
Show more
Awful Awful Awful
Just does not seem to even allow you to register rejecting password each time. Hopeless
Config device is not working
Config device from app ia not working anymore. I have a EG4
datalogger does not appear
hello..
I have set up a datalogger on the program, but it does not appear
It appears that there is a device, but the datalogger does not appear
Solution please
I have set up a datalogger on the program, but it does not appear
It appears that there is a device, but the datalogger does not appear
Solution please
Device List
No longer capable of seen the devices listed.
Good information but works inconsistently
I like the information presented in the app, but find that it only works 50% of the time. I am using it with an EG4 6000-EX inverter. It would seem that with a little more attention it would be an excellent program. Keep in mind that the program only updates every 5 minutes and is not real-time. I only wish it was more reliable.
Show more
