Sonir Remote

Sonir Remote

Room EQ for Sonir Bench

0 ratings
Free

Rating summary

Details

Released
October 5, 2026
Updated
November 9, 2026

Features

Sonir Remote screenshot #1 for iPhone
Sonir Remote screenshot #2 for iPhone
Sonir Remote screenshot #3 for iPhone
Sonir Remote screenshot #4 for iPhone
Sonir Remote screenshot #5 for iPhone
Sonir Remote screenshot #6 for iPhone
Sonir Remote screenshot #7 for iPhone
Sonir Remote screenshot #8 for iPhone
Sonir Remote screenshot #9 for iPhone
Sonir Remote screenshot #10 for iPhone
iphone
ipad
🖼️Get Icon
Icons↘︎

About

Sonir Remote measures your listening position and sends a room correction to Sonir Bench. Bench plays the sweep through your own system. The phone records it, turns it into a frequency response and an automatic PEQ, and sends back only the filter settings. The recording never leaves the phone. How it works - Connect: pick your Sonir Bench from the list of Benches on the same network. Next time it reconnects on its own. If it does not appear, scan the QR code Bench shows. - Microphone: choose the input and load a calibration file (UMIK, REW, FRD). Optional. - Level: play a test tone and set your amplifier so the input sits between -12 and -6 dBFS. - Measure: Bench plays the sweep and the phone records it. Add positions to average them. - EQ: choose a target curve (Flat, Tilt, Harman, B&K) and a limit, and send the automatic PEQ to Bench. Measure through the current correction to compare your room before and after. Library Save measurements on the phone and open them again: RT60, EDT, C50, D50, frequency response, ETC, decay and excess group delay. Select two or more to overlay and compare. Requirements - Sonir Bench on a Mac, on the same local network. - The built-in microphone works. A calibrated measurement microphone is recommended. No account, no ads, no analytics.
Show more

What's New in Sonir Remote

0.3.3

November 9, 2026

- Clearer measuring steps. Each step's explanation now sits behind the (i) next to its title. - Room EQ is saved on the Re-measure step, keeping the before and after together as one entry. Open it in the Library to compare them overlaid. - Room EQ now cuts large peaks fully, even right next to a deep dip. - The measuring level is judged against the room's noise, so you can measure at your usual listening volume. - A room EQ sent to Sonir Bench is applied right away, even the first time, so you can go straight on to re-measure (Sonir Bench 0.3.2 or later).

More

Developer apps