
SSMLink
Live data for 90s Subaru ECUs
0 ratings
Free
Rating summary
About
SSMLink reads live engine data from 1990–1996 Subaru engine computers (ECUs) through the yellow Select Monitor diagnostic connector, using a small ESP32 Bluetooth adapter you build yourself. It's made for Subaru-powered conversions, especially EJ22 swaps in VW Vanagons and Westfalias, and works on stock 1990s Legacys, Imprezas and SVXs too.
LIVE DATA
• Engine speed, coolant temperature, battery voltage, vehicle speed, throttle sensor, O₂, fuel correction, ignition timing, idle valve duty, airflow, injector pulse and more.
• Normal ranges for a healthy EJ22 on every tile; values outside them turn orange or red.
• Tap any value for a graph of the last 1, 5 or 15 minutes. Turn the phone sideways for a full-screen chart.
• Every value explains what it measures, what's normal and what odd readings usually mean in a swap: vacuum leaks, trapped air in long coolant runs, voltage lost in a conversion harness, a missing speed sensor.
TROUBLE CODES
• Reads current and stored codes with plain-language descriptions, and clears the ECU's memory like the dealer Select Monitor.
SWAP CHECK
• A checklist for conversions: manual or automatic ECU, diagnostic connectors, speed sensor, neutral and idle switches, fuel pump, radiator fan, charging, O₂ switching, fuel trim and knock. Checks fill in as you idle, shift and drive.
SWITCHES
• The ECU's on/off signals as lights, with a history strip. Ideal for finding harness wiring faults.
RECORD
• Log any selection to a CSV file and share it.
THE RIGHT ADDRESS MAP, AUTOMATICALLY
• Reads the ECU's ROM ID and picks the matching address map from 15 built-in maps (1990–1999 EJ22, turbo, WRX and SVX ECUs). Add your own parameters for anything else.
US OR METRIC
• mph, °F, inHg and psi, or km/h, °C, mmHg and bar, set from the gear on the Live tab.
TRY IT WITHOUT A CAR
• The built-in demo ECU simulates a 1993–94 EJ22 on a one-minute drive loop, so every screen works before you build the adapter.
THE ADAPTER
• An ESP32 board plus a few parts (a comparator, a buffer and a 12 V to 5 V converter). For the build guide, wiring and firmware, email nickma@gmail.com.
NOTES
• SSM1 is slow: a real ECU answers about five values per second, so select only what you need.
• Not affiliated with or endorsed by Subaru or Volkswagen. Check values against your gauges, and never use the app while driving.
Built on community research: Kevin Frank's Select Monitor Scan Tool, Phil Skuse's SSM pages (alcyone.org.uk), the B10 Scan Tool by Vikash Ravi Goel and Bill Codding's EJ22 pages.
Show more
+1
What's New in SSMLink
1.1
November 11, 2026
New Drive tab: full-screen gauges for engine speed, coolant, battery, road speed, throttle, timing and more. Swipe for more pages, long-press a gauge to change what it shows, and turn the phone sideways for bigger gauges. A gauge flashes red when its reading leaves the normal range, and the screen stays on while you drive. The Console has moved to Settings > Advanced; you can still show it as a tab. Updated support and privacy page links.
More



