TechDeck SPL gets a touring sound system back to its reference levels in every new venue, fast.
Measure once at your reference stop and save the targets: Main L 76 dBA from center orchestra, subs, onstage FX, whatever you check. At each new venue, open a row and TechDeck SPL shows the difference from target in huge type, green when you're within tolerance. Trim at the console until it's green, then move to the next row.
No QLab? TechDeck SPL is still a full sound level meter and real-time analyzer.
LEVEL SHEETS
• A sheet per show with source, position, target, weighting, response and tolerance for every check
• Capture: average the live reading for a few seconds and save it as the target, along with the room's spectrum
• Tolerance from ±0.5 to ±6 dB, per row or as a show default
• Venue log of what each row landed at, exportable as CSV
• Share a show with another phone over AirDrop
• Shows are backed up automatically
QLAB CUES
• Give each row a QLab cue number; selecting the row starts the cue and moving on stops it
• Finds QLab on the network automatically and reconnects after a drop
• Stop all QLab cues from the status badge at any time
METER AND RTA
• A, C and Z weighting with Fast and Slow response
• Leq, max, min and peak, plus a 3-second settled reading
• Real-time analyzer in 1/1, 1/3 and 1/6 octave bands, with a steady scale and peak hold
• Overlay the spectrum captured at your reference stop to see how a room differs
IPHONE, IPAD AND APPLE WATCH
• Runs on iPhone and iPad, with layouts that use the larger screen
• See the live level and the difference from target on your wrist
• Previous, Next and Stop cue from your Apple Watch without taking out your phone
CALIBRATION
• Calibrate against a reference meter, or a 94/114 dB calibrator with a measurement mic
• USB measurement mics and audio interfaces, with channel selection remembered for each interface
• Load a mic correction file (UMIK-style frequency/dB)
TechDeck SPL is a practical level-matching tool, not a certified Class 1 or Class 2 sound level meter. For compliance measurements, use a certified meter.
TechDeck SPL is an independent app and is not affiliated with or endorsed by Figure 53. QLab is a trademark of Figure 53, LLC.
Show more