Why is this still in the App Store?
Response from developer
Whichi device (VC-FLX or TH-GW10) do you use?
Still not working
The fail starts at A-5. The network “Thingsxxx” is not in the list of available networks.
Response from developer
=== Reply on Jun 26. Thank you for your information. You failed at A-5. So you're going to set up the device for the first time. Then the device says "Hello please use the Toshiba app, and perform initial setup" and the LED becomes solid white. After that, the device becomes AP mode. The SSID is "THINGS_" + "6 characters". "THINGS_" is a large character. The part of "6 characters" is individual code by each device. In my case, "THINGS_CBFD40". Your device has a deference code. I hope you find the SSID. If you cannot find it, go back to setting once, and then tap "Wi-Fi". iPhone reloads the network. === Reply on Jun. 25 Thank you very much for buying THGW10 or VCFLX1. This is the first time for setting up the device? if so please operate from A-1. I think something I cannot expect has happened, so please tell me where you fail. A-1. Turn on the device and wait for a message "Hello please use the Toshiba app, and perform initial setup”. If your device doesn't say this message. please go to step B-1. A-2. Launch the app, tap "Initial Setup" on the Welcome screen. A-3. Tap "Connect to Device" then it'll be navigated to "Toshiba Smart Home App" settings. A-4. Tap "< Settings", then the mobile device shows "Settings”. A-5. Tap "Wi-Fi". Please find THINGS_xxxxxx in the network list. A-6. Connect to THINGS_xxxxxx. Please wait for completing to connect the device. A-7. Tap "Toshiba Smart Home" at the upper left. you can go back to the app. A-8. You can change the device name (you can skip this step.) and tap "Done”. A-9. Select the Wi-Fi router and put a password and tap "Done”. A-10. When LED stops pulsing becomes solid white, please tap goto pairing. A-11. Next step, you need to log in using your Amazon account to register the device. A-12. If you want to use Alexa, please log in with Alexa using your Amazon account. A-13. Select a zone name. A-14. The device update may be started. please wait for a few minutes. The app will detect after finishing the device SW update and reboot it. Please keep turn on the device. B-1 Turn on, the device says “Welcome”, “discovering network”, then “connected wifi” or “I’m having trouble connecting to the internet.”. In this case, you have set up the device before. if the device can find Wi-Fi you set up before, it succeeds to connect wifi, but it cannot connect to it, it fails to connect Wi-Fi. B-2 If you remember Amazon ID you set up before for the device, please go to B-3, If you don’t remember Amazon ID, please go to step C-1 B-3 Press and hold for about 10 seconds Network/Pairing button until Top LEDs show fountain. B-4 Then go to step A-2. if Amazon ID you remember is deference from the device has set up, you fail at A-11. If you fail it, please go to step C-1. C-1 Please press and hold the Reset button over 15 seconds. The device will reset to the factory default setting. If you have set up something before, they will be deleted. C-2 Turn on the device. The initializing process maybe takes longer. please wait a few minutes. please go to step A-1.
The app does not work.
Response from developer
Thank you for your comment. There're 2 buttons "Initial Setup" and "Add User" on the Welcome screen. I think you tap "Add User" and see a text box of an invitation code. It's for adding another mobile device. This feature is for a situation you invite someone to the device. You can send an invitation e-mail using this app to your friend or family member. If you have already set up the device, you can see a setting button on a home screen at the upper left. I introduce a step to send an invitation code. 1. Settings > Account > Add User 2. Put e-mail address and tap "Done". 3. An e-mail will be sent from no-reply@tsb-smarthome.com It has the following information. -- Your invitation code for the Toshiba Smart Home application is xxxxxxxxxxxxxx. This invitation code will expire 24 hours from now. -- 4. He/She can set up and connect the device using the invitation code as a guest. The sender of invitation e-mail is the Administrator of the device. 5. After connecting the device, the Administrator needs to select some feature allowing to access to a guest. Settings > Other Account > "user name". Then you can select GUEST PERMISSIONS (Sensors, Live Video, History/Playback). The default "user name" is iPhone's name. The guest was a limited feature of the device. If you want to change the permission of the guest mobile device, please go to Settings>Account>Login on the guest mobile device and log in with ID/PW you set up the device. The first time you use the device (TH-GW10 or VC-FLX1), you need to tap "Initial Setup". Please use the latest version 1.23. Thank you so much.
Literally, the worst device!
Response from developer
We release v1.23. Please update the app. I think you cannot proceed initial setup of the device (TH-GW10 or VC-FLX1). I introduce a process the first time you set up the device using the iOS app. 1. Turn on the device and wait for a message "Hello please use the Toshiba app, and perform initial setup". 2. Launch the app, tap "Initial Setup" on the Welcome screen. 3. Tap "Connect to Device" then it'll be navigated to "Toshiba Smart Home App" settings. 4. Tap "< Settings", then the mobile device shows "Settings". 5. Tap "Wi-Fi". Please find THINGS_xxxxxx in the network list. 6. Connect to THINGS_xxxxxx. Please wait for completing to connect the device. 7. Tap "Toshiba Smart Home" at the upper left. you can go back to the app. 8. You can change the device name (you can skip this step.) and tap "Done". 9. Select the Wi-Fi router and put a password and tap "Done". 10. When LED stops pulsing becomes solid white, please tap goto pairing. 11. Next step, you need to log in using your Amazon account to register the device. 12. If you want to use Alexa, please log in with Alexa using your Amazon account. 13. Select a zone name. 14. The device update may be started. please wait for a few minutes. The app will detect after finishing the device SW update and reboot it. Please keep turn on the device. I hope this would be your help. Thank you,
Does not work
Response from developer
We release v1.23. Please update the app. I think you cannot proceed initial setup of the device (TH-GW10 or VC-FLX1). I introduce a process the first time you set up the device using the iOS app. 1. Turn on the device and wait for a message "Hello please use the Toshiba app, and perform initial setup". 2. Launch the app, tap "Initial Setup" on the Welcome screen. 3. Tap "Connect to Device" then it'll be navigated to "Toshiba Smart Home App" settings. 4. Tap "< Settings", then the mobile device shows "Settings". 5. Tap "Wi-Fi". Please find THINGS_xxxxxx in the network list. 6. Connect to THINGS_xxxxxx. Please wait for completing to connect the device. 7. Tap "Toshiba Smart Home" at the upper left. you can go back to the app. 8. You can change the device name (you can skip this step.) and tap "Done". 9. Select the Wi-Fi router and put a password and tap "Done". 10. When LED stops pulsing becomes solid white, please tap goto pairing. 11. Next step, you need to log in using your Amazon account to register the device. 12. If you want to use Alexa, please log in with Alexa using your Amazon account. 13. Select a zone name. 14. The device update may be started. please wait for a few minutes. The app will detect after finishing the device SW update and reboot it. Please keep turn on the device. I hope this would be your help. Thank you,
Don’t waste your money
Response from developer
I'm sorry for late. Does the app show a pop-up menu of (a)" "device name" cannot be connected. Please check that it is powered on and that your Wi-Fi network is working. Tap "Wi-Fi Settings button" below to reconnect "device name" to your network ", when launch app? When the app launch, it's going to connect to the device through the cloud of Toshiba. When it cannot connect to the device, it cannot show a Home Screen. In that case, the app shows the pop-up (a). In order to show Home Screen, the device has to be connected to the internet. So I'd like to ask you to check the device turns on or not and network condition first. If your network configuration was changed after you set up the device, you can set up Wi-Fi again if you tap "Wi-Fi Settings." of the pop-up(a) Please allow me if I don't understand correctly your situation. Thank you.
Don’t waste time
Worthless
Response from developer
This app works for TH-GW10 or VC-FLX1, not Toshiba smart TV. Thank you so much for your interesting in this app.
GARBAGE
I’m using them as BT speakers separately because they can’t be linked together either.
Response from developer
Unfortunately, this product doesn't support Play-Fi originally. This device has "Home control", "Live Video", "Rule-based control" and so on. I hope you enjoy other functions, too.
