
Tube Miter Calculator
Tube Cuts & Stock Optimizer
0 ratings
$4.99
Rating summary
About
Work out the cut. Check the geometry. Keep the setup.
Tube Miter Calculator is a native iPhone and iPad workshop tool that connects cut inputs, calculated dimensions and interactive setup drawings in one workflow. Configure both ends of a tube or profile, inspect the drawing, save the project and export a report for the job.
CUT ASSISTANT
Choose from six end configurations:
• Square / Miter
• Parallel miters
• Opposed miters
• Pointed / Pointed
• Pointed / V-notch
• V-notch / V-notch
Enter tube width, drawing length, angles and blunt edges. Use long-edge, short-edge or centerline length references for simple cuts, or overall and shoulder/reference lengths for shaped ends.
For pointed and V-notch ends, configure each end independently. Enter two cut angles, or enter one angle and a junction position to calculate the second angle.
INTERACTIVE LIVE VIEW
See dimensions, end identities and angle annotations update as you change the inputs. Open the full-screen drawing, rotate it in 90° or 180° steps, flip it vertically, and switch between complementary and supplementary angle annotations to inspect the setup from different orientations.
COMPOUND CUTS
Calculate miter and blade-tilt settings for tapered boxes, pyramids and angled frames. Review slant height and edge offset alongside the saw settings.
BOARD FEET
Estimate lumber volume, board feet, material cost and cost with a waste allowance. Metric mode uses price per cubic metre; imperial mode uses price per board foot.
STOCK OPTIMIZER
Enter available bar lengths, quantities, part sizes, kerf and end trim. Generate a practical cutting plan with visual bar layouts, remaining lengths and material utilization.
WORKSHOP CALCULATOR
Use arithmetic and degree-based trigonometry without leaving the app. Copy the displayed result with one tap.
SAVE AND SHARE YOUR SETUP
Save named projects locally and reload them from module-specific History. Export PNG reports to Photos or share them through the iOS share sheet.
MADE FOR REPEATED WORK
• Custom numeric keypad with sign, clear and delete controls
• Remembered metric or imperial units, with conversion of current dimensions
• Optional screen-awake setting
• Temporary-file cleanup and project deletion controls
• Fully offline operation, with no account required
Drawings are schematic setup aids, not scale templates. Verify saw conventions, workpiece orientation, scrap side and kerf, and check a first-off part before batch cutting. Stock optimization uses a practical heuristic and does not guarantee the mathematically optimal arrangement.
Show more
What's New in Tube Miter Calculator
1.0
October 23, 2026






