
WeldSet: Welding Calculator
Any Brand · MIG TIG Stick Amps
0 ratings
Free
In-App Purchases
Rating summary
About
WeldSet is a welding settings calculator that works with any brand of machine. Pick the process, metal and thickness and a live setpoint dial settles on your starting amps, with wire feed, voltage, travel speed, heat input, gas and polarity beside it. Tune it on your own machine, then save what actually worked.
WHAT MAKES WELDSET DIFFERENT
• Any brand, any machine. The numbers are machine-agnostic starting points, not a guide to one manufacturer's welder.
• Hands-free with Siri. Say "WeldSet welding settings", pick a process, metal and thickness, and Siri speaks the starting amps without opening the app.
• A live setpoint dial. The result is a gauge with the recommended range banded in, and the needle moves as you change the thickness.
• A job book for your own machines. Name the machine, dial the amps to what worked, log the volts and wire feed it actually ran (MIG and Flux-core), add a note, and load it back into the dial next time. With the unlock, keep a bead photo with each job.
• A settings card. Turn any result into an image to AirDrop or text to the crew.
EVERY PROCESS, EVERY METAL
MIG, TIG, Stick and Flux-core on mild steel, stainless, aluminum and chrome-moly. Thickness in inches, millimeters or sheet gauge.
WHAT YOU GET
• Starting amperage with a sensible range
• Wire feed speed, voltage, travel speed and heat input (MIG and self-shielded Flux-core), plus gas and polarity
• Tungsten, filler rod, gas and polarity (TIG)
• Electrode size, rod type and polarity (Stick)
• A foreman's tip for the thickness you're on
BUILT FOR THE SHOP
• Works fully offline: no account, no signup, no signal needed
• Free: MIG on mild steel, the dial, the settings card and 3 saved jobs
HONEST BY DESIGN
Every number is a starting point, not gospel. Verify on your machine and follow your WPS and shop safety. Values are based on published manufacturer and AWS practice.
ONE-TIME UNLOCK, NO SUBSCRIPTION
A one-time unlock adds TIG, Stick, Flux-core, stainless, aluminum and chrome-moly, unlimited saved jobs and bead photos. The price shows before you buy.
Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/
Privacy Policy: https://weldset.aiappnation.com/privacy
Show more
What's New in WeldSet
1.0.7
November 2, 2026
Pick Flat, Horizontal, Vertical up or Overhead on the calculator. Out-of-position settings lower the starting heat and add a tip for the weld. Saved jobs and settings cards remember the position. If the unlock can't load from the App Store, the upgrade screen shows a Try again button. Small fixes to how WeldSet is described on the App Store.
More1
Subscriptions & In-App Purchases
$14.99
WeldSet Unlock
Every process, every material, unlimited saved jobs.




