
YaDiag Pro
OBD2 Tool for Yamaha
0 ratings
$17.99
About
YaDiag Pro is a professional-grade motorcycle diagnostics and real-time telemetry application engineered for KWP2000 and CAN-Bus (ISO 15765-4) compatible bikes, communicating via standard Bluetooth Low Energy (BLE) adapters (such as vLinker MC+, UniCarScan UCSI-2100, and OBDLink CX/MX+).
Unlike generic automotive OBD2 scanners, YaDiag Pro integrates genuine manufacturer-level diagnostic protocols and maintenance routines designed specifically for Japanese motorcycle electronic control units (FI Engine ECU and ABS Brake ECU).
PROFESSIONAL FEATURES (PRO EDITION):
• Full Engine ECU Diagnostics (FI ECU): Advanced DTC scanning (OBD Modes 03/07/0A) and ACTIVE FAULT CLEARING (Clear DTC Mode 04) to extinguish the Check Engine light (MIL) after maintenance.
• ABS Brake ECU Diagnostics: Dedicated communication with the ABS hydraulic control unit via K-Line / KWP2000 / CAN (ID 7E3/7E5) to read and decode wheel speed sensor faults, line pressure errors, and valve circuit anomalies.
• ISC Idle Stepper Motor Reset (Diagnostic Code 67): Factory-level adaptive learning reset routine for the idle speed control stepper motor following throttle body cleaning or synchronization.
• O2 Lambda Sensor Trim Reset (Diagnostic Code 87): Clear closed-loop air/fuel ratio learned trim maps from ECU memory.
• Throttle Body Health Indicator: Real-time calculation of throttle valve opening compensation percentage to detect carbon buildup and schedule preventative servicing.
• Official PDF Diagnostic Certificate: Instant generation of comprehensive A4 diagnostic reports detailing vehicle status, DTC records, ISC/O2 parameters, and dedicated fields for workshop stamp and technician signature. Shareable via AirDrop, Email, or cloud storage.
• Dashboard Service Reset Guide: Built-in step-by-step instructions to manually reset the "OIL TRIP" service interval directly from the instrument cluster of your specific motorcycle model.
• High-Frequency Live Telemetry & CSV Logging: 10 Hz dynamic analog tachometer, digital rev counter, gear indicator, battery voltage, ECT/IAT temperatures, and live telemetry export to CSV.
• Virtual Bench Test Simulator (Demo Mode): Test all screens and commands without a physical motorcycle or dongle using realistic simulated dynamic data streams.
SUPPORTED MOTORCYCLE PLATFORMS:
Certified Platform (100% verified on road and dyno):
• Tracer 900 / Tracer 900 GT (Euro 4, 2017–2020)
• CP3 Euro 4 Family: MT-09 / MT-09 SP, XSR900 (2016–2020)
Compatible KWP2000 / CAN Platforms:
• CP2 Family: MT-07, Tracer 700, Ténéré 700, XSR700
• CP4 & Supersport Family: MT-10 / MT-10 SP, YZF-R1, YZF-R6
(Note: Live telemetry, DTC clearing, and ABS diagnostics are supported. Special adaptive routines 67/87 availability depends on specific ECU firmware).
Standard OBD2 Compatibility:
• Euro 5 models (2021+) equipped with the standard 16-pin ISO 19689 diagnostic socket.
HARDWARE REQUIREMENTS:
1. A compliant Bluetooth Low Energy (BLE) OBD2 adapter (recommended: vLinker MC+, UniCarScan UCSI-2100, OBDLink CX/MX+).
2. A motorcycle-specific diagnostic adapter cable (4-pin connector for Euro 4, or standard 16-pin connector for Euro 5).
TRADEMARK DISCLAIMER & LEGAL NOTICE:
YaDiag Pro is an independent software application developed by Jacopo Bellarosa. The trademarks Yamaha, Tracer, MT-09, MT-07, XSR, Ténéré, YZF-R1, YZF-R6, and related model names or logos belong to their respective registered owners and are used here solely to identify vehicle technical compatibility under applicable fair-use provisions. YaDiag Pro is not affiliated with, authorized by, or endorsed by Yamaha Motor Co., Ltd.
Show more
What's New in YaDiag Pro
1.0
November 6, 2026




