CrossOver Filter vs GSound RTA
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
CrossOver Filter
Design and simulate car stereo or home audio crossover filters with professional precision. Calculate various filter types, Q factors, and component values. Includes signal generation and project sharing features.
- Crossover filter calculation (2-way, tweeter, mid-range, subwoofer)
- Selectable Q factor of Merit (Butterworth, Bessel, etc.)
- Zobel and Speaker Attenuation calculation
- Notch circuit calculation
- Component value calculation (resistors, coils, capacitors)
- Speaker cable attenuation and resistance calculation
- Signal generator (frequency sweep, noise)
- Project PDF/image generation and sharing
Read full descriptionHide full description
Designs and simulates the Crossover Filter of your car stereo system or home in a simple and professional way at the same time. Features and Functions: • Crossover Filter Calculation for Two-Way 6 / 12 / 18 and 24dB / octave. • Crossover Filter Calculation for Tweeter to 6 / 12 / 18 and 24dB / octave. • Crossover Filter Calculation for Mid-range to 6 / 12 and 18dB / octave. • Crossover Filter Calculation for Subwoofer / Woofer to 6 / 12 / 18 and 24dB / octave. Ability to select the "Q factor of Merit" in Two-Way, Tweeter and Subwoofer / Woofer (Butterworth, Bessel, Chebyshev, Linkwitz-Riley and Linear Phase). • Zobel Circuit Calculation. • Speaker Attenuation Calculation. • "Check Projects" of filters already existing. • Notch Circuit Parallel Calculation. • Notch Circuit Series Calculation. • Calculating Resistances, Coils and Capacitors in series or parallel connections. • Calculation Speaker Cable Attenuation and Cable Resistance with selection of metal cable (Copper, OFC Copper, LC-OFC Copper, Tin-Plated Copper, Nichel-Plated Copper, Silver and Aluminium). • Conversion table for AWG / mm / mm2. • Signal Generator, slide to select the Frequency from 20Hz to 20KHz, Sweep Up and Sweep Down to 20Hz/20KHz, Ascending tones, Descending tones, Pink Noise and White Noise. • Assembly diagram of Crossover. • Generates PDF files or image files to share or save your project. • Sharing of projects through Mail, iMessage and Social networks. • Saving of project in Photo, iBooks, Note, Dropbox, Google Drive, Evernote, etc. • Printing of project.
GSound RTA
Read full descriptionHide full description
GSound RTA is a sound analyzer for sound engineers and karaoke system owners. FEEDBACK FINDER Raise the mic volume slowly and the app catches the frequency that starts to ring, then tells you what to do: "31-band EQ: pull the 2.5k slider down 6 dB. PEQ: 2480 Hz, Q 8–10, cut 6 dB". Every feedback frequency is listed so you can EQ them one by one. It tells feedback apart from fans, mains hum, speech and sung notes, so background noise rarely triggers false alarms. PHASE: ALIGN MAINS AND SUBS Just the iPhone, no audio interface needed. Cable the iPhone to the mixer: the app plays pink noise through the system and listens with the phone's mic. Measure the main, store it, then measure the sub. The app overlays both traces and tells you how many ms of delay to add to which speaker, and whether to flip polarity. • Magnitude, phase and coherence on one screen. Where the data is unreliable, the phase trace fades out. • Store 4 traces (A, B, C, D) to compare. Smoothing from 1/3 to 1/24 octave. • Finds the system delay for you, fine-tune in 0.1 ms steps. The iPhone volume also scales the signal sent to the mixer: keep it high and set the level with the fader. After adjusting, listen and measure again to confirm. RTA TAB: THREE VIEWS • RTA in 1/1, 1/3 (matches a 31-band EQ), 1/6 and 1/12 octave bands with peak hold and a marker on the highest band caught. • High-resolution FFT up to 32768 points, 4 windows, frequency cursor. • Spectrogram: feedback shows as a bright horizontal line. • dB meter with A / C / Z weighting, LAeq, LAmax, clip warning. dB SPL calibration against a reference meter. • Full-screen graphs and freeze to read values. SIGNAL GENERATOR Pink noise, white noise and sine 20 Hz – 20 kHz for system EQ, rattle hunting and subwoofer checks. MICROPHONE Uses the iOS Measurement mode: no automatic gain, noise reduction or voice filtering. Choose the bottom, front or back iPhone mic. Works with USB measurement mics (miniDSP UMIK-1…) via USB-C or a Lightning to USB 3 camera adapter. No ads, no account, no internet needed. Audio is processed on the phone only and never recorded. Vietnamese and English.
Screenshots
Verdict
The clearest difference is price: GSound RTA at Free against CrossOver Filter's $1.99. GSound RTA also leads on update cadence (every 4 days vs every 4 months). CrossOver Filter's advantage is device support (3 vs 1) and iOS requirement (8.2 vs 17.0). On ads and in-app purchases there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
GSound RTA is free to download; CrossOver Filter costs $1.99 up front. Neither carries in-app purchases, so what you see is what you pay.
CrossOver Filter ships an update every 4 months, GSound RTA every 4 days. The most recent releases landed on November 16, 2026 and November 13, 2026 respectively.
| Parameter | CrossOver Filter | GSound RTA |
|---|---|---|
| Price | $1.99 | Free — better |
| Rating | 2.7 (3 ratings) — better | — |
| Positive reviews | 33.3% of reviews | — |
| Number of ratings | 3 — better | — |
| Update frequency | Every 4 months | Every 4 days — better |
| Ads | No | No |
| In-app purchases | No | No |
| Monetization | Paid | — |
| Devices | iPhone, iPad, iPod — better | iPhone |
| Requires iOS | 8.2 — better | 17.0 |
| Further details — not scored | ||
| Size | 28 MB | 1 MB |
| Age rating | 4+ | 4+ |
| Developer | Pasquale Puglisi | Duy Linh Bui |
In-app purchases
CrossOver Filter
No in-app purchases
GSound RTA
No in-app purchases





