Caravan Level vs JMARemotesPro

Description:- This is similar to other surface bubble level apps but has 2 unique features. Firstly it can speak the amount in Degrees, Dimensions (Metric or Imperial) or Blocks your Caravan is out of level front-to-rear and side-to-side, then confirm when it’s level in all directions. Secondly it can have a customised offset when you intentionally need something with a small angle and this offset is remembered. If your iDevice has a cover or protruding camera these are also compensated for. It works on either an iPhone, iPad or 5th generation iPod running iOS 8.2 or above and doesn't require calibrating or the Internet. CaravanLevel is aimed primarily for Caravan, Motorhome and RV enthusiasts displaying a diagram with arrows & ramps where its low but would also be useful for general DIY. It has an option to use the built in speech feature so app “says” where on the Vehicle it's low and by how much, then finally when it's all level. If you have chosen to use sounds or better still speech, then with your iDevice volume loud enough and the Caravan door open you can hear where and how much it needs raising in degrees from outside. Most useful of all is if you have a wireless Bluetooth Earbud (which are not too expensive) or wireless Bluetooth Headphones, you can hear as you walk around the outside making adjustments the amount Caravan or Vehicle is low. Alternatively it has the ability to play sounds indicating when the iDevice is low, nearly level or completely level but you need to see the screen as well so you know which area is low. Basic method of use:- 1/ The first time only, level your Caravan or Motorhome as normal. 2/ Place iDevice on firm flat surface anywhere convenient, even places at a strange angle, like a Motorhome dashboard. 3/ Set-up CaravanLevel as described below and main screen will go pale blue. 4/ In the future whenever you arrive at a new site, just place iDevice in same location as before and using information displayed on CaravanLevel screen to adjust your Caravan or Motorhome until screen turns pale blue again. If you have sounds or better still speech enabled, this tells you where its low, making adjustments much easier. Double Tap Gestures:- There is a simple compass feature that just points ‘South’ as an aid to positioning your Caravan, Motorhome or awning towards the sun. This is also useful for users with solar panels so they don’t park in the shadow of trees. To display the yellow arrow just double tap with one finger in the main screen and to discard it, double tap again. NOTE:- Unfortunately this feature is not available on the iPod. Swipe Gestures:- To temporarily toggle sounds or speech On or Off just swipe horizontally either from Left to Right or Right to Left or touch the speaker button top right. If you go to another screen or close the app, sounds return to chosen switch state. To permanently turn sound On or Off, go to the ‘Settings’ screen and use the switch next to ‘Enable Sounds’ or ‘Spoken Feedback’ (both together is not permitted). You can change the time interval between sounds or spoken advice telling you how low the vehicle is and which side(s) or corner. To increase the delay swipe Down (maximum approximately 30 seconds) and swipe Up to reduce delay (minimum approximately 2 seconds). Note this feature only works when sounds are enabled. Compatibility:- CaravanLevel is Universal and compatible with 5th generation iPod, all iPad’s and iPhone’s from iPhone 4S to iPhone 14, iPhone 14 Pro and iPhone 14 Pro Max. Requires iOS 9.0 or later.

The JMARemotesPro app provides a simple, intuitive and convenient way to copy rolling code and fixed code garage door remote controls. It also offers such additional features as the generation of rolling code remotes without needing the original, the reading of codes already present on a JMA remote and the storage of copied codes in a database.   Description of the features   Remote control copying:   Via a step-by-step guide that includes text and images, users can copy various original rolling code or fixed code remote controls. For rolling code remotes, the app provides such important information as the serial number, customization options and a counter for the original remote, which can be changed if required. Automatic, manual and clone copying options are available for rolling codes, as well as a scanner option for certain models.   Remote control reading   At any time, users can read the information stored on each button of a JMA remote control and save it in a database for subsequent use if necessary.   Remote control generation   By using this app, rolling code remote controls can be generated without needing the original remote. This process can be completed by selecting the manufacturer and configuring the desired settings or by loading up a remote control previously saved in the database.   Fixed codes can only be loaded from a database if they have been stored previously, but without selecting the manufacturer or model.   Rolling code remote controls that can be generated:   Requirements:   - The device must be compatible with BLE (Bluetooth Low Energy) - The JMA M-BT remote control is needed to function with the app. To activate Bluetooth, hold buttons 2 and 3 on the M-BT remote control until the green LED flashes. - Bluetooth must be activated on the device for the app to work.