IPMask vs MAC Vendors

IPMask works out an IPv4 network from an address and a mask: network and broadcast address, first and last host, number of hosts, netmask and wildcard. • Type the address the way you have it: 192.168.1.1, 192.168.1.1/22 or with a dotted mask. • Move the mask slider and watch the 32 bits split into the network part and the host part. • See the address type at a glance: private, public, loopback, link-local, multicast. • Switch to the binary view to see the address, netmask and network bit by bit. • Copy the whole result as text or share it. • On Apple Watch: enter an address with a keypad, turn the Digital Crown to set the prefix and read the result on your wrist. /31 point-to-point links (RFC 3021) and /32 host routes are handled correctly. Made for network engineers, students and anyone who sets up a router at home. The app works offline; it needs a connection only for the small ad banner.

MAC Vendors is a mobile app that helps IT professionals to figure out MAC Address details, starting with the company of manufacture details to the technical details of the MAC address itself. Company name, address, location on Maps, MAC address prefix, HEX start, HEX end and the maximum number of devices in a given prefix. You can simply write the MAC or scan it with the embedded scanner. The App gives you the ability to scan connected WiFi or Hotspot network and provide all possible details related to the connected pairs on the same network; starting with the IP address, MAC address, Device name and Company of manufacture. Please note that if your device is running iOS 10 or before, you will be able to see the MAC Addresses of the connected devices to the WiFi you are scanning. Starting with iOS 11, this feature is not available. Be Safe every time you are connected to a WiFi or hotspot by scanning it.