Vibroscope vs Groove
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
Vibroscope
This tool uses your device's accelerometer to analyze vibrations in real-time, even those inaudible to humans. It visualizes acceleration data and offers FFT analysis for frequency components, with options to log measurements.
- Real-time vibration measurement
- Inaudible vibration detection
- Two-axial coordinate display
- Time-axis waveform display
- FFT analyzer for frequency components
- Data logging to text files
- Snapshot of measurement screen
Read full descriptionHide full description
"Vibroscope" is a powerful vibration analysis tool that uses the iPhone's acceleration sensor to measure various vibrations in real time. It allows you to monitor and visualize very low frequency vibrations that are inaudible to the human ear. This app intuitively detects acceleration amounts and displays the two-axial coordinates in the horizontal direction and the time-axis waveform in the vertical direction. It can measure by determining the horizontal or vertical direction to suit the attitude of the iPhone automatically, so as to be available on the floor and desk or handheld. "Vibroscope" is also equipped with FFT analyzer that can analyze the frequency components of very low frequency vibrations. The measurement data can also be saved as a log file, so you can use it as a vibration data logger. Application Examples: - Analysis of the amount of acceleration and frequency components of the floor and walls during car traffic. - Measurement of howling vibration of audio equipment, etc. - Detection of acceleration and vibration of trains and automobiles. - Body balance check (horizontal body shaking detection). - Measurement of vibration acceleration during earthquakes, etc. (displayed value x 100 [GAL]) Features: - Measurement of vibrations (Main): acceleration values (m/s/s) - Real-time display: the horizontal direction (X-Y) - 2-axis vector plane graph, the vertical direction (Z) - the time-varying graph. - Display scale switching of vibration acceleration graph (Linear/Log): Linear - linear scale display, Log - logarithmic scale display. - 3-axis composite acceleration display (Compo) - Peak level value display (Peak) - Switching of acceleration display (Instant/Average): Instant - instantaneous acceleration, Average - average acceleration per second. - Scaling of measurement display range - FFT analysis for 3-axis directional and composite acceleration, with peak frequency (FFT) - FFT graph display control (Axes/Axis-1/Axis-2) - Switching of sensor sampling period (Slow/Fast): slow, fast - Axis direction (Axis): Swapping the axis direction on the graph display during operation. - Measurement timer function: 1 sec to 1 hour - Start delay timer function: 0 - 20 sec - Reference level setting in FFT mode: 1e-6m/s/s, or 1e-5m/s/s - Snapshot of the measurement screen (Snap): Capture the measurement results and Timestamp to "Photos". - Data Logger: X-axis, Y-axis, Z-axis, saved in a text file (UTF8). It saves the measurement data, timestamp to LOG file. Important settings: - At the time of the first access to Photos after installing the app, you will be asked permission to access them from the iOS system. If you did not enable this setting on this time, it cannot be access from the app by privacy restrictions of the iOS. Please enable slide switch of the app in the access permission of the iOS setting, "Settings > Privacy & Security > Photos". - This app does not support to the background operation, so it needs to set on "Never" in the iOS setting, "Settings > General > Auto-Lock" for a long-time operation. Notes: - In general, there is variation and accuracy error by individual terminals and sensor devices of the iPhone, so this app does not recommend the use in the formal measurement. It is also possible that the accuracy error will accumulate if the vibration is too large, it may not be appropriate to display the measured value. - While driving a car or operating machinery, please do not use this app for safety. - The logarithmic scale graph displays very small numerical value, so it may be affected by noise and temperature error in your environment or time fluctuation of sensor calibration. - Log data can be transferred from an iOS device to a Mac or PC using the iTunes File Sharing feature. MacOS Catalina and later can share files between an iOS device and a Mac using the Finder. Please visit our iOS app support page for more information on this app.
Groove
Read full descriptionHide full description
Set up your turntable the right way — cartridge alignment, tonearm resonance, and loading — with every number traced to its source. No subscription, no account, works offline. CARTRIDGE ALIGNMENT Enter your tonearm's effective length (or pivot-to-spindle distance) and Groove gives you the exact overhang, offset angle, and null points. Choose your geometry: Baerwald (Löfgren A), Löfgren B, or Stevenson, against IEC or DIN groove radii. The math is the classic Löfgren/Baerwald two-null solution — verified against the published reference values, not guessed. RESONANCE MATCH The single most-asked vinyl question: is my cartridge a good match for my arm? Enter the arm's effective mass and the cartridge's compliance and mass, and Groove shows the tonearm/cartridge resonance frequency — with a clear read on whether it lands in the 8–11 Hz sweet spot, below it (warp and footfall trouble), or above it (into the audible band). Cartridge spec'd at 100 Hz? One toggle converts it. CARTRIDGE LOADING Dial in the electrical load. For moving-magnet cartridges, Groove adds your cable and phono-stage capacitance and compares it to the cartridge's target. For moving-coil, it gives the recommended load impedance. SAVED PER TURNTABLE Keep your deck's numbers in a saved profile so you're not re-entering them every time you swap a cartridge or check resonance. SOURCE-CITED, ALWAYS Every figure names its authority — Löfgren and Baerwald for alignment, Hi-Fi News for the resonance window, the IEC/DIN groove standards, Vinyl Engine and Korf Audio for the reference tables. A Sources screen links them all. Groove tells you where each number comes from so you can verify it yourself. BUILT RIGHT • Works fully offline — no account, no tracking, no data collected. • Dark theme, full Dynamic Type, and VoiceOver support. • Universal — iPhone and iPad. FREE, WITH AN OPTIONAL ONE-TIME UNLOCK Groove is free to use: Baerwald alignment (IEC and DIN), the full resonance calculator, the setup reference, and one saved turntable. Groove Pro is a single one-time purchase — no subscription — that adds: • Löfgren B and Stevenson alignments • Cartridge loading (MM capacitance budget and MC impedance) • Unlimited saved turntables GOOD TO KNOW Groove is a setup aid, not a substitute for your tonearm and cartridge manuals. Compliance and mass figures come from your cartridge's published specs; confirm against the manufacturer. A printable on-screen protractor is on the way in a future update — for now Groove gives you the precise numbers to set on your own protractor.
Screenshots
Verdict
The clearest difference is price: Groove at Free against Vibroscope's $7.99. Groove also leads on update cadence (monthly vs every 8 months) and iOS requirement (17.0 vs 26.0). Vibroscope's advantage is in-app purchases (none vs 1). On ads and device support there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Groove is free to download; Vibroscope costs $7.99 up front. Groove sells 1 one-off in-app purchase. Vibroscope asks for nothing beyond the download.
Vibroscope ships an update every 8 months, Groove monthly. Both last shipped on November 13, 2026.
| Parameter | Vibroscope | Groove |
|---|---|---|
| Price | $7.99 | Free — better |
| Rating | 5.0 (2 ratings) — better | — |
| Positive reviews | 40.0% of reviews | — |
| Number of ratings | 2 — better | — |
| Update frequency | Every 8 months | Monthly — better |
| Ads | No | No |
| In-app purchases | No — better | Yes |
| Monetization | Paid | — |
| Devices | iPhone | iPhone, iPad — better |
| Requires iOS | 26.0 | 17.0 — better |
| Further details — not scored | ||
| Size | 1 MB | 1 MB |
| Age rating | 4+ | 4+ |
| Developer | TOON,LLC | Roman Kopaliani |
In-app purchases
Vibroscope
No in-app purchases
Groove
- Groove Pro (lifetime)$4.99
Questions
Is Vibroscope free?
Is Groove free?
Do Vibroscope or Groove have ads?
Which is updated more often, Vibroscope or Groove?
Other comparisons















