Satori Remote vs Multi

Satori Mobile App is specifically designed to work with Antelope Audio's Satori Monitoring Controller. The intuitive mobile app turns your iOS-based device into a professional remote control for your monitoring system. It completely manages Satori’s entire functionality, giving the producer the comfort of having fast and easy monitoring control at their fingertips. Youtube Satori preview: https://www.youtube.com/watch?v=BQEfHC3n73w Satori Mobile App offers: • Input/Output Selection • Flexible Monitor Adjustment • Input/Output Trim • Independent HP Volume Selection • Stereo Effects Selection • Talkback Functionality If the mobile app is stuck with a "Searching..." message on its first screen and cannot connect to the Satori device, try the following troubleshooting steps: 1. Make sure the Control Panel is running on your computer while the mobile app is working. 2. Make sure the Satori device is plugged into the computer running the Control Panel via USB cable. The Control Panel must *not* be showing a "No device connected" message. 3. The mobile phone's WiFi must be turned on and connected to the computer's LAN network. The mobile network won't do. 4. Ensure that the mobile phone and the computer are on the same LAN network - this includes the same VLAN, if relevant. Try running a "ping" command between the computer and the phone to ensure visibility. 5. In case your computer has several network adapters (including virtual ones like those installed by VMWare, VirtualBox and other programs), try disabling all adapters but the one you use to connect to the phone's network. Then restart the Control Panel and try connecting again. 6. The computer's firewall, if any, should allow communication over TCP ports 5007 and 20000 and UDP port 20001 for the Control Panel, both incoming and outgoing. 7. Make sure the computer's firewall, if any, doesn't block outgoing UDP multicast packets to IP address 239.192.5.6 8. Make sure there are no firewall blocking rules like those above on your WiFi access point as well. 9. If you use an iOS device (iPhone or iPad) as a Wi-Fi hotspot and you run the app on another iOS device, make sure you turn off Bluetooth on your hotspot device after the "Personal hotspot" option is turned on. 10. The Satori Remote Control app currently does not support Apple's AirPort Express router. Try using another Wi-Fi router or access point.

This is a AUv3 compatible audio effect which can be used as plugin with your favourite DAW such as Cubasis, Meteor, Auria or GarageBand. It supports a modern graphical interface and presets with stereo meters for monitoring signal levels. The Multi-Tap delay takes the traditional digital delay to the next level. Instead of a single delay line you have up to 4 taps at your disposal. Each tap has an adjustable delay which can either be a value in milliseconds or a division of a beat. This is because the effect tracks the host tempo and can automatically match the beat by just pressing the sync button on each tap. Some taps can be free running while others synced to the beat. What really makes this type of delay shine is that fact you can choose to either have all taps play back in series or stack them end on end in parallel mode. This allows for some very creative and unusual patterns which are not achievable using a conventional delay. A dedicated LFO synced to the host tempo can also be used to apply modulation to each of the taps. You can modulate the frequency to create a chorus/ensemble type effect, vary the amplitude to create a vibrato effect, create an oscillating pan or even run the tap in reverse echo mode or through a band pass filter. This is a great tool to have at your disposal, allowing you to some unusual delay effects not available with a conventional delay. All parameters fully support automation. This is one of a suite of AUv3 compatible plugins which will also soon be available from 4Pockets.