Digidot C4 vs LM Home

This application only works with DiGidot C4 devices! The DiGidot C4 is a small powerful LED controller, that suits all kinds of situations. One DiGidot C4 drives more than 6000 single LEDs. Furthermore, it supports 50+ IC types and various industry standards. This is all you need in LED and show control. With this application you can setup the DiGidot C4. You can adjust the number of universes, the type of LED (the LED light IC chip) and route them to a preferred output. Are you using multiple DiGidot C4’s daisy-chained or in a network? Name them the way you want and give them a unique IP address to easily recognise them in your project! By using the DiGidot C4 with a 'Extended' license you can easily record scenes. After recording, there are several options that come with the playback. You can play/stop a scene and delete it if unnecessary. In addition, scenes can be downloaded and transfered from one C4 to another. Note that scenes are strictly compatible with C4s with identical configurations. When a recording is done with several DiGidot C4s the play button will depict the content on every C4, regardless which C4 is chosen. Once you have the scenes on your microSD there are several ways to start scenes, apart from the application Playback. To do this you need to add triggers. The C4 has multiple trigger types. For example, you can chose a scene at the moment that the C4 is booted. The C4 is also equiped with a 3.5mm barrel jack, which allows analog input to be sent to the C4. Physical switches or even motion sensors can be connected too. Time related triggers can be created, so a specific scene will be displayed or be switched on and off at chosen times. 'HTTP' trigger makes it possible to trigger scenes with a HTTP request. The DiGidot C4 Controller works with most common LED software used in professional event lighting. The device was thoroughly tested with MADRIX, but we can assure it works well with other software, such as: ArKaos, Chromateq, Pharos and Resolume Arena. Nonetheless, the DiGidot C4 was used numerous times with grandMA consoles.

The LM Home application provides an iOS device connection to any of the LogicMachine family products. The app will automatically find all devices on the network and there is no need to know its IP. User and password are saved to simplify the connection. When on DATA or another WIFI network, the LM Home app will automatically connect to LogicMachine Cloud to control your home remotely via a secure connection. It can receive push notifications sent from LogicMachine to notify about anything that is important to the user. Instructions: 1. Make sure that LogicMachine has firmware 2024 or newer. 2. Open app while on the same network as LogicMachine. If there is only one LM then app will automatically connect and ask for user and password, this must be added once. If there is more then one LM on the network app will allow to select LM to connect too. 3. To add more LMs press and hold the app icon on mobile and select Add LM. 4. Co connect to cloud turn off Wi-fi or connect from a network where LogicMachine is not present. 5. To remove already saved credentials, select Clear cache. Clear config will remove all added LMs. To remove single LM select Remove LM and then select LM which should be removed. App works only with LogicMachine firmware 2024.01 or newer! Do not use admin account as credentials will not be saved! For more information please use our forum: https://forum.logicmachine.net/showthread.php?tid=5220&pid=33788#pid33788