F vs Comp 609

F-16 Filter is a flexible multi-mode filter with frequency response display. It features sixteen modes, frequency and resonance controls, saturation for analog-style soft clipping, and wet/dry mix. The 4 pole lowpass mode provides the frequency response of classic the Moog ladder filter. The other modes provide all of the choices available in the famous Oberheim Matrix 12 and Xpander synthesizers. At the heart of F-16 is a Zero Delay Feedback algorithm, the latest in DSP filtering technology. F-16 Filter gives you a wide variety of filtering options with pristine fidelity. F-16 Filter is an AUv3 that works inside host apps. Just open up your favorite host that supports AUv3 and add it as an effect. Compatible with GarageBand, Cubasis, Auria, BeatMaker, AudioBus, AUM, Modstep, and more. Blamsoft brings their experience creating top notch plug-ins for the desktop to iOS. The same filter modes are found in the popular Rack Extension for Propellerhead Reason. You get a desktop quality plug-in at an iOS friendly price. In addition to controlling the filter through the knobs and sliders, you can use the frequency response display to control cutoff frequency and resonance simultaneously. The sixteen filter modes available are: 1, 2, 3, and 4 Pole Lowpass 1, 2, 3, and 4, Pole Highpass 2 and 4 Pole Bandpass 2 Pole Notch 3 Pole Phase 2 Pole Highpass + 1 Pole Lowpass 3 Pole Highpass + 1 Pole Lowpass 2 Pole Notch + 1 Pole Lowpass 3 Pole Phase + 1 Pole Lowpass Tap Developer Website for sound examples.

Comp 609 AUv3 plug-in — comes as time-limited Demo-version for you to try. It gives you 5 minutes of Free play time. (You can reload the Comp 609 AUv3 plug-in as many times as you want, thereby you get the Demo period again and again.) Unlimited version of Comp 609 AUv3 plug-in comes as In-App Purchase. FEATURES: • 6 Attack, 9 Recovery (Release) and 5 Ratio selections; • External Sidechain and Sidechain signal High-pass filter; • 6 operation modes: M/S, Mid-channel, Side-channel, Mono with Right-channel as Sidechain signal, 2-Mono, linked Stereo (or Mono); • Parallel compression; • 8x Oversampling and 64-bit floating point processing; • Undo/Redo; • A/B comparison; • 2x/4x/8x Upsampling; • Macro controllers; • Built-in Gain Match; • Scalable GUI. COMPRESSOR SECTION: • Threshold determines how much compression will occur. When the input signal exceeds the Threshold level, the compressor engages. A smaller value results in more compression. The available range is from -20 dBu to +12 dBu; • Attack determines how fast limiting will engage when the signal exceeds the limiter Threshold. The available values is from 1 to 6; • Recovery (Release) is the time it takes for the compressor to stop processing after the signal drops below the Threshold value. The available values are 40, 80, 100, 400, 600, 800, 1000, 1500, 2000 ms; • Ratio — this control determines the compressor ratio. The available values are 1.5:1, 2:1, 3:1, 4:1 and 6:1; • Sat. On — this toggle switch enables the Analog Saturation. The saturation has no effect unless this switch is in the «On» (down) position. MASTER SECTION: • SC-Filter — the Sidechain Filter controls the cutoff frequency of a low-cut filter on the compressor control signal Sidechain. The available range is 30 Hz to 240 Hz and Off; • Input Gain controls the signal input level to the plug-in; • The Makeup control increases the signal level out of the compressor to compensate for reduced levels as a result of compression. The available range is -20 dB to +20 dB. The Makeup control does not affect the amount of compression; • Mix — the output balance between the signal processed by the plug-in and the original dry source signal can be adjusted with the Mix control. Mix facilitates parallel compression techniques without having to create additional routings in the DAW; • Comp. In — this toggle switch enables the compressor. The compressor has no effect unless this switch is in the «In» (down) position. • Mode — compressor can operate in six modes: M/S, Mid-channel, Side-channel, Mono with Right-channel as Sidechain signal, 2-Mono, linked Stereo (or Mono). This switch determines the active mode. To use Comp 609 as a plug-in, you need an AUv3-compatible host app like GarageBand, Auria, AUM, Cubasis and more — Comp 609 will appear in the list of Audio Unit extensions for effect plug-ins in the host app.