RMU3 Config vs FieldSense MeterSense

*** Requires a corTalk® RBT1 or RMU123PGM and RMU3 to use. *** Contact us at 'sales.rmu3@mobiltex.com' to purchase. This app is for configuring the corTalk® RMU3 (Remote Monitoring Unit 3) with a Bluetooth configuration interface. Both the RBT1 or RMU123PGM are compatible. They both function as a complete RMU3 programming interface but only requires the Bluetooth connection of your phone to use. The RMU3 is used to monitor a cathodic protection rectifier with accurate measurement of a wide variety of signals; it can also control the rectifier for survey operations by switching a relay at precisely timed intervals. This app allows access to diagnostic information on the RMU3 and allows setting up the configuration to meet the customer's needs. Note that measurement data logs, due to their size, can only be extracted from the RMU3 using the PC configuration application through the USB port. The app allows full configuration of the RMU3 including - slot measurement types - limits - slot scaling and offset - relay options - instant off timing - interruption On/Off/Cycle Other features include the - viewing of readings and their limits - detailed status screen for troubleshooting - integrated manual - wiring diagrams for each measurement type The RBT1 and RMU123PGM is always in a Bluetooth pairing mode and requires a pairing code entered on the app. The pairing code (default=123456) can be found and changed with the app. Once paired, the iOS device can reconnect without needing to re-enter the code. The RBT1 pairing code can be reset by tapping the RBT1 5 times in 10 seconds with a user-supplied magnet.

The MeterSense app is a component of Connexo FieldSense, a solution for the administration, configuration and service of Honeywell smart meters. Features: Communication to Honeywell smart meters - Support for Honeywell meter families: AC250 NXS, NXU, Alpha 4, A3 ALPHA, REXUniversal. - Support for all ANSI C12 communication protocols: ANSI C12.18, ANSI C12.21, ANSI C12.22. - Local communication to Honeywell smart meters via meter’s optical port using Bluetooth. - Remote communication to Honeywell smart meters: - IPv4 for meter equipped with WAN interface (e.g., cellular modem). - IPv6 for meters connected via SynergyNet® mesh network. Meter readings: store, view, manage - View and manage list of meter readings generated by the app. - Open a stored meter readings and display all meter data in a comprehensive set of meter views. - Capture and associate meter photo to a reading (when the reading is performed over optical port). - Capture and associate meter location to a reading (when the reading is performed over optical port). Synchronize to Metercat Server via secure HTTPS interface, upon successful authentication: - Metercat Server sends to the app the data/settings authorized to the user by the Connexo FieldSense administrator (e.g., authorized functions, authorized meter programs, phone book entries, etc.). - MeterSense sends to the server the meter readings, meter locations/photos, audits logs and any other data generated by the app during operation in the field. Extensive library of meter functions - Support extensive library of functions for Honeywell meters. Integrated HTML Help - App >Help offers detailed information on app functionality and useful reference documentation for Honeywell smart-meters.