Quickfem vs G

Quickfem, the 2D Finite Element Analysis App for Engineers and Students. FEA for Students Learn how finite elements and structural analysis works by starting out with simple models you can build directly on your phone or tablet. Play around with geometry, constraints, loads, materials and results to augment the theory. FEA for Engineers FEA is hard. Most problems are 3d and complex and require the major packages such as Ansys, Abacus, Patran, Nastran etc. But engineers have to know what to expect from these models and this insight stems from the understanding of simple mechanisms and effects. With Quickfem, you have the most convenient FEA modeller imaginable in your back pocket! Simple touch geometry creation, automatic meshing, quick mesh refinement, simple constant strain elements, and near solution instant feedback creates the tight iteration loops necessary for rapid discovery. Running on your mobile device, Quickfem gives you the freedom to create and understand structural models wherever and whenever inspiration strikes. Know what to expect. Featuring - Automatic meshing - 2D constant strain triangle FEM - Up to 100,000 elements - 3D view and edit mode - Axisymmetric FEA modelling - Plane stress and plane strain - Thermal mechanical (thermomechanical) analysis - Complex geometry, arcs, fillets, holes - Fastener representations, grounded or connected to 1 or more plates - Convergence checking through user defined mesh size - Displacements fringe and deformation plots - Strain and stress fringe plots - Equivalent and principal stress fringe plots - Maxima and minima - Unit systems, SI, US, none or custom - Default and customer material definitions - Customisable modelling environment, materials, loads, units, precision, feature thickness, mesh sizes - Example models Go to www.quickfem.com for more

G-Force Meter+ Accelerometer shows the G-force your phone feels right now on every axis, then turns each drive, ride or run into a result you can read: press Start, press Stop, and a session card shows the peak G, the average G and how hard you cornered, accelerated and braked. ▶ Live G-force on every axis • Total G on a round gauge with a moving dot for the direction of the force • Lateral (X), longitudinal (Y) and vertical (Z) values side by side • Min, average, max and peak while you record, plus peak chips for lateral, accel and brake • A scrolling chart of X, Y, Z and total G, or a sentence that explains the current G level ▶ Stop and see the session Press Stop and a Session result card appears: • Duration, peak G and average G • Peak lateral, peak accel and peak brake • A second-by-second G trend line (the first 10 minutes of a session) • With the Car activity selected, a plain-language reading of the drive, from Gentle to Very hard, based on the peak horizontal G Every finished session is saved to History automatically (the last 20). A session shorter than 2 seconds is not saved. If you switch apps mid-session, recording pauses in the background and the same session resumes when you return, and a session cut off when the system closes the app is recovered into History on the next launch. Share a result as text in one tap. ▶ History and personal bests Open History from the top of the Meter screen: personal bests, every session with its G trend, your race runs and rolling runs. Export sessions, runs or rolling intervals as CSV. A statistics report CSV unlocks for 24 hours after a short ad. ▶ G-G friction circle A dedicated tab plots lateral against longitudinal G as a trail inside rings at 0.5, 1.0 and 1.5 G, with peak lateral, longitudinal and combined G, so you can see how much grip you used in corners and under braking. ▶ Race mode • 0-60 mph launch timing with raw and rollout times • 60-0 mph brake test with time, distance and speed shed, estimated from the motion sensors • Rolling intervals: 60-120 mph, 100-200 km/h, 30-50 mph or your own range • GPS cross-check with a GPS 0-60 time, a quarter mile time and trap speed. A good fix shows a GPS-verified badge, otherwise the result is labelled as a sensor estimate • Regen profile for electric cars: braking events sorted by their strength into likely regen (gentle) and likely friction (hard), with their maximum G ▶ Set up for your car • Dash or Holder mount, auto-level and Re-level now • Reference 1G (resting reads 1.00 G) or 0G (resting reads 0.00 G) • Display sensitivity from 0.5x to 2.0x for the live gauge; the result card always shows the true values • Activity presets for Car, Roller-coaster, Sport, Elevator and Aircraft explain what each G level means there • A Guide tab with 8 tips on mounting, reading each axis and typical G in daily life • The screen stays on while recording • Interface in 30 languages ▶ Good to know Readings come from the phone's motion sensor, so mount the phone firmly and level it before you record. Launch and braking times are estimates unless they carry the GPS-verified badge. Only drive-test where it is safe and legal. For drivers checking how smooth or hard they drive, track-day and drag-strip fans, roller-coaster riders, and students who want to see physics in numbers.