SpeedyBee App vs Star Debug

SpeedyBee is an Appllication for Flight controller parameters settings. Communication between mobile devices and flight control boards can be achieved through Bluetooth, you can use mobile devices to set the parameters of the flight controller.Any Bluetooth module compatible with your mobile device can be used, but if using the SpeedyBee Bluetooth-UART Adapter, this Bluetooth module will deactivate and activate automatically according to the status of the drone(armed/disarmed), no Bluetooth signal interference during the flight. Flight Controller Requirements: Betaflight firmware version ≥ 3.1.0 iNav FC version ≥ 1.8.1 Butterflight firmware version ≥ 3.1.0 System Requirements : iOS 13.0+ Instructions for use： 1.Connect the Bluetooth PCB with the UART interface of the Flight Controller, or use the flight controller integrated  Bluetooth. 2.Open the Betaflight Configurator, on the Ports tab, open the Configuration/MSP port of the Bluetooth PCB, for the Bluettooth module of BLE4.0, 19200 is the recommended baud rate value. 3.Open the APP, connect the Flight Controller via Bluetooth, and you can adjust the parameters now.

Star Debug is an alternative tool to manage your Starlink devices. Currently, it supports: - Decode and view DebugData json copied (or saved to file) from the official Starlink app or web panel. - Initiate basic operations with the dish: Reboot/Stow/Unstow/GPSon/off and with the router: reboot and basic wifi setup (if applicable). - View telemetry available in DebugData, but updated from Starlink online: statuses, alerts, basic stats, current configurations, etc. - Create and share DebugData-compatible json data. - Check the internet connection in place within the app. This application was created as part of the volunteer initiative "Narodnyi Starlink" for the needs of people who care about the availability of communications even in the places where the russian aggressor tries to turn cities into ashes.