SpeedyBee App vs FPV Scanner

SpeedyBee is an Appllication for Flight controller parameters settings. Communication between mobile devices and flight control boards can be achieved through Bluetooth, you can use mobile devices to set the parameters of the flight controller.Any Bluetooth module compatible with your mobile device can be used, but if using the SpeedyBee Bluetooth-UART Adapter, this Bluetooth module will deactivate and activate automatically according to the status of the drone(armed/disarmed), no Bluetooth signal interference during the flight. Flight Controller Requirements: Betaflight firmware version ≥ 3.1.0 iNav FC version ≥ 1.8.1 Butterflight firmware version ≥ 3.1.0 System Requirements : iOS 13.0+ Instructions for use： 1.Connect the Bluetooth PCB with the UART interface of the Flight Controller, or use the flight controller integrated  Bluetooth. 2.Open the Betaflight Configurator, on the Ports tab, open the Configuration/MSP port of the Bluetooth PCB, for the Bluettooth module of BLE4.0, 19200 is the recommended baud rate value. 3.Open the APP, connect the Flight Controller via Bluetooth, and you can adjust the parameters now.

FPV Scanner pairs with the FPV Scanner Module over Bluetooth® to scan the 5.8 GHz FPV spectrum. Choose your FPV equipment (DJI, Walksnail, HDZero, Analog, etc) and watch real time scanning of 5.8 Ghz frequencies, with your channels overlaid. Advanced analytics tell you if a channel is triggered by FPV equipment, so you can see which channels are being used (with historical timeline), and which are open. Label channels with pilot names so you know what your friends are using. Optionally have your device notify you as channels are triggered and available. The module keeps track of the history data, so you can turn on and off the phone or app and still see the last 10 minutes of activity. Key features - Real-time 5.8 GHz scan with per-channel RSSI bars - 10 minute channel history to catch brief activity spikes - Channel activity alerts (optional notifications) - Module management with quick reconnect - OTA firmware updates via your Wi-Fi credentials Requirements - FPV.Scanner.Module hardware: bit.ly/FPVScanner - Bluetooth® enabled on your iPhone/iPad