SpeedyBee App vs PhoneStage

SpeedyBee is an Appllication for Flight controller parameters settings. Communication between mobile devices and flight control boards can be achieved through Bluetooth, you can use mobile devices to set the parameters of the flight controller.Any Bluetooth module compatible with your mobile device can be used, but if using the SpeedyBee Bluetooth-UART Adapter, this Bluetooth module will deactivate and activate automatically according to the status of the drone(armed/disarmed), no Bluetooth signal interference during the flight. Flight Controller Requirements: Betaflight firmware version ≥ 3.1.0 iNav FC version ≥ 1.8.1 Butterflight firmware version ≥ 3.1.0 System Requirements : iOS 13.0+ Instructions for use： 1.Connect the Bluetooth PCB with the UART interface of the Flight Controller, or use the flight controller integrated  Bluetooth. 2.Open the Betaflight Configurator, on the Ports tab, open the Configuration/MSP port of the Bluetooth PCB, for the Bluettooth module of BLE4.0, 19200 is the recommended baud rate value. 3.Open the APP, connect the Flight Controller via Bluetooth, and you can adjust the parameters now.

PhoneStage brings live screen sharing into an interactive 3D presentation in your browser. Connect your device to PhoneStage Viewer in a computer browser on the same local network. Scan the QR code or enter the connection details, approve the browser, and start the system screen broadcast. The Viewer displays your live screen inside an adjustable 3D device model and follows its orientation. Use PhoneStage to: • Demonstrate app features and explain each step • Present tutorials, lessons, and product walkthroughs • Rotate and tilt your device to move the 3D model • Manage trusted browsers and remove access at any time Screen content is sent directly between your device and the connected Viewer over your local network. No account, in-app purchase, or subscription is required. You can stop sharing at any time using the system screen-recording control. Requirements PhoneStage is a companion app for PhoneStage Viewer and works with iPhone. Open the Viewer in a compatible browser on a Mac connected to the same Wi-Fi network as the sending device. PhoneStage is independently developed and is not affiliated with, sponsored by, or endorsed by Apple.