PhaseChecker vs SoundMeter Pro 2022

The PhaseCheck app will run a test signal through your sound system to ensure your speakers are in-phase and wired with the correct polarity. It can be run either manually or automatically.  Manual mode allows you to run the test signal and flip the phase so you can listen yourself to ensure your sound system is setup correctly.  Automatic mode will run a series of test signals through your sound system and use the microphone on the device to analyse the results. New in version 2.0 is a waveform view mode for advanced use. It allows you to play an asymmetrical waveform (ramp waveform), record the sound from each speaker close up and capture the waveforms to then compare them. Phase is a difficult concept so full help is available in the app to ensure you get the best results. You should check the phase of your sound system whenever the wiring has been changed to ensure everything is the correct polarity. When a sound systems speakers are out of phase the sound quality is affected massively. Bass is reduced significantly and stereo imaging gives the illusion of the sounds pulling outside of the room. To run the check connect your iOS device to your sound system so it can play audio. If possible place the iOS device evenly between the speakers. Phase cancellation will not occur close to the speakers so ensure the device is not too close. Ensure the volume is at a comfortable listening level and if possible ensure there is no background noise to interfere with the scan.

SoundMeter Pro 2022 is not recommended for new purchases. SoundMeter X offers perpetual license and subscription options for the latest tools and features. SoundMeter Pro turns your iPhone or iPad into a handheld data-logging sound level meter (SLM), data-logging noise dosimeter, stereo signal generator, multi-channel data recorder, and real-time whole or 1/3 octave band spectrum analyzer (RTA). Input signals can be acquired from the current (manually selectable) audio input path. Sensitivity calibration can also be performed for any audio input device and/or input channel. Direct hardware support (automatic sensitivity calibration, based on factory-defined values) for The Modal Shop’s 2-channel 485B39 USB-ICP interface and miniDSP’s UMIK-1, UMIK-2, and E.A.R.S. microphones. In addition to real-time sound level measurements, SoundMeter can stream raw sound data to audio files, and store acquired sound level data, including date, time, and location, in CSV or TXT (tab-delimited) files, MAT-files, or high-resolution PDF images for later retrieval from your device. Features: - User-defined custom metadata in saved audio and data files - Level Meter -- Lp, Leq, Lx sound levels -- Standard Flat, A, C frequency weighting -- Standard Fast, Slow, Impulse time weighting -- Data logging. Data can be logged as often as every 0.1 seconds for up to 8 hours, every second for up to 72 hours, or every 10 seconds for up to two weeks. -- Event notifications - Max Levels Meter -- Traffic-light-style meters make it easy to monitor 2 separate sound level thresholds in 2 independent user-defined frequency bands. -- Define lower (warning) and higher (limit) sound level thresholds for overall (full audio band) levels as well as for individual octave frequency bands. -- Store user-defined thresholds in files for later recall. -- View auxiliary sound level or octave spectrum display with the device in landscape orientation. - Noise Dosimeter -- 8-hour Noise Dose, Projected Dose, TWA calculations -- Criterion Levels: 80, 85, 90 dB -- Exchange Rates: 3, 4, 5 dB -- Data logging. Data can be logged as often as every 0.1 seconds for up to 8 hours, every second for up to 72 hours, or every 10 seconds for up to two weeks. -- Event notifications - Real-time Octave Spectrum Analyzer (RTA) -- Lp, Leq, Lx sound levels -- Supports whole or 1/3-octave frequency bands -- Standard Flat, A, C frequency weighting -- Standard Fast, Slow, Impulse time weighting -- NC, RNC, and NR references curves, NC, SIL, and NR values -- Data logging. Data can be logged as often as every 0.1 seconds for up to 8 hours, every second for up to 72 hours, or every 10 seconds for up to two weeks. -- Event notifications - Multi-channel Data Recorder -- Supports up to 8 channels (up to 16 on iPad) -- Live monitoring of recorded data -- Metadata (including calibrated sensitivity) embedded in audio file (AIF, CAF, WAV), optionally saved in separate data file - Stereo Signal Generator -- Left and right outputs assigned to arbitrary hardware output channels -- Random and pseudorandom (periodic) noise sequences with white or pink spectrum -- Linear and logarithmic frequency sweeps -- Dual periodic waveforms with arbitrary frequency and phase difference Learn more about SoundMeter Pro 2022 at FaberAcoustical.com. SoundMeter Pro 2022 will receive major upgrades, consistent with those available in the SoundMeter X Pro subscription, through calendar year 2023, after which it will receive maintenance updates through 2025. It can be used indefinitely thereafter on a compatible version of iOS or iPadOS.